 Custom fuel rail, for stock injectors |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| yarin |
 Feb 21 2006, 07:52 AM
Post
#1
|
|
'14-X'in FOOL  Group: Members Posts: 988 Joined: 13-May 03 From: Guttenberg, NJ Member No.: 693 Region Association: North East States  |
Like most people I'm not too thrilled with the design of the fuel rail system. I'm planning on buying 2 6" pieces of aluminum fuel rail and tapping it for 5/16" barbed fittings (3/8" NPT). I'm assuming that 3/8 NPT -> barb 5/16 exist. I found em.. on ebay
Does anyone know what the exact OD of the fuel injectors are? I'd like to use 5/16" high pressure fuel line on everything. I'm pretty sure I'll have to fab a bracket to support the extra weight of the fuel rail. I'm surprised the stock fuel rail is floating. I'll also tap a 1/8" NPT for the fuel pressure gauge. I've seen a fuel rail kit on the market, but it costs $170 or so. I can build this for ~$30. |
   |
 
|
Posts in this topic
yarin Custom fuel rail Feb 21 2006, 07:52 AM
DNHunt Yarin
I'm not sure why you want to work so ha... Feb 21 2006, 08:42 AM yarin I know the stock rail can flow enough fuel, i... Feb 21 2006, 09:07 AM jsteele22 I agree that the stock design has problems. In my... Feb 21 2006, 11:56 AM yarin ... Feb 21 2006, 03:10 PM Cap'n Krusty Feb 21 2006, 03:20 PM Rand The stock fuel rail is fine, and floating is fine.... Feb 21 2006, 03:26 PM lapuwali ... Feb 21 2006, 03:27 PM
Mueller ... Feb 21 2006, 03:56 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 18th May 2024 - 12:10 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.