Home  |  Forums  |  914 Info  |  Blogs
 
914World.com - The fastest growing online 914 community!
 
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG. This site is not affiliated with Porsche in any way.
Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners.
 

Welcome Guest ( Log In | Register )

> OT: Backyard metal foundry almost done :), aluminum/brass casting getting closer...
Mueller
post Mar 20 2006, 09:56 AM
Post #1


914 Freak!
***************

Group: Members
Posts: 17,146
Joined: 4-January 03
From: Antioch, CA
Member No.: 87
Region Association: None
The burner is finished, I got the plans from http://www.backyardmetalcasting.com/index.html

It's a pretty simple propane burner, built from steel pipe for gas lines....cost a few bucks to make (the regulator with gauge cost about $40)

I hope to be melting some aluminum and brass sometime this week....not as loud as I thougt it would be, but it does make some noise <!-- emo&:D -->(IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif)<!-- endemo -->

So far my "donor" aluminum scrap will come from some old used 2.0 pistons, a 914 steering rack, possibly an old 15x7 Phonedial that had a run in with a curb...of course I still don't know what the heck I am going to attept to make...

The neighbors are nervous


(IMG:http://www.914world.com/bbs2/uploads/blog-1129160231.jpg)
(IMG:http://www.914world.com/bbs2/uploads/blog-1142869932.jpg)
(IMG:http://www.914world.com/bbs2/uploads/blog-1142869944.jpg)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
3 Pages V  1 2 3 >  
 Reply to this topicStart new topic
Replies(1 - 19)
URY914
post Mar 20 2006, 10:05 AM
Post #2


I built the lightest 914 in the history of mankind.
****************************************************************************************************

Group: Members
Posts: 120,811
Joined: 3-February 03
From: Jacksonville, FL
Member No.: 222
Region Association: None
Looks like a bigass crack pipe. You better be careful.

Make some outside door handle flappers. (IMG:http://www.914world.com/bbs2/html/emoticons/wink.gif)
User is online!Profile CardPM
Go to the top of the page
+Quote Post
Dr Evil
post Mar 20 2006, 10:56 AM
Post #3


Send me your transmission!
***************

Group: Members
Posts: 23,001
Joined: 21-November 03
From: Loveland, OH 45140
Member No.: 1,372
Region Association: MidAtlantic Region
I can't wait to have a house some day so I can make my neighbors nervous with my smelting, welding, cooking bio diesel, etc.

Lead the way, Mike (IMG:http://www.914world.com/bbs2/html/emoticons/wink.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Aaron Cox
post Mar 20 2006, 10:58 AM
Post #4


Professional Lawn Dart
***************

Group: Retired Admin
Posts: 24,541
Joined: 1-February 03
From: OC
Member No.: 219
Region Association: Southern California
fog light grills!
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Mueller
post Mar 20 2006, 11:11 AM
Post #5


914 Freak!
***************

Group: Members
Posts: 17,146
Joined: 4-January 03
From: Antioch, CA
Member No.: 87
Region Association: None
QUOTE (Aaron Cox @ Mar 20 2006, 09:58 AM)
fog light grills!

I think I'll start off with parts that are a "little" less detailed (IMG:http://www.914world.com/bbs2/html/emoticons/smile.gif)

those would be a PITA to sandcast, and building a mold for a diecast would be out of my abilities (IMG:http://www.914world.com/bbs2/html/emoticons/headbang.gif)

User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Aaron Cox
post Mar 20 2006, 11:12 AM
Post #6


Professional Lawn Dart
***************

Group: Retired Admin
Posts: 24,541
Joined: 1-February 03
From: OC
Member No.: 219
Region Association: Southern California
QUOTE (Mueller @ Mar 20 2006, 10:11 AM)
QUOTE (Aaron Cox @ Mar 20 2006, 09:58 AM)
fog light grills!

I think I'll start off with parts that are a "little" less detailed (IMG:http://www.914world.com/bbs2/html/emoticons/smile.gif)

those would be a PITA to sandcast, and building a mold for a diecast would be out of my abilities (IMG:http://www.914world.com/bbs2/html/emoticons/headbang.gif)

is mueller chickening out (IMG:http://www.914world.com/bbs2/html/emoticons/poke.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/laugh.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Dr. Roger
post Mar 20 2006, 11:15 AM
Post #7


A bat out of hell.
****

Group: Members
Posts: 3,944
Joined: 31-January 05
From: Hercules, California
Member No.: 3,533
Region Association: Northern California
so mike,.....

aren't you supposed to be working on the 914 or turbo volvo projects???

(IMG:http://www.914world.com/bbs2/html/emoticons/laugh.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/laugh.gif)

the offer of a helping hand still stands. (IMG:http://www.914world.com/bbs2/html/emoticons/cool.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Mueller
post Mar 20 2006, 11:23 AM
Post #8


914 Freak!
***************

Group: Members
Posts: 17,146
Joined: 4-January 03
From: Antioch, CA
Member No.: 87
Region Association: None
QUOTE (Dr. Roger @ Mar 20 2006, 10:15 AM)
so mike,.....

aren't you supposed to be working on the 914 or turbo volvo projects???

(IMG:http://www.914world.com/bbs2/html/emoticons/laugh.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/laugh.gif)

the offer of a helping hand still stands. (IMG:http://www.914world.com/bbs2/html/emoticons/cool.gif)

I need to remove mine or find a set or rear trailing arms to get powdercoated...got all the front parts ready, just too lazy to drop the rear suspension (and still trying to figure out what color(s) I'll be using..........
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
McMark
post Mar 20 2006, 11:24 AM
Post #9


914 Freak!
***************

Group: Retired Admin
Posts: 20,179
Joined: 13-March 03
From: Grand Rapids, MI
Member No.: 419
Region Association: None
I have three sets. Taking up room in my garage. (IMG:http://www.914world.com/bbs2/html/emoticons/barf.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
davep
post Mar 20 2006, 11:30 AM
Post #10


914 Historian
*****

Group: Benefactors
Posts: 5,148
Joined: 13-October 03
From: Burford, ON, N0E 1A0
Member No.: 1,244
Region Association: Canada
I hear Jake needs a foundry to cast some badass heads. JK
I'd be a little concerned about the aluminum you are using. There are so many alloys designed for so many properties. I don't know if what you are planning to use is the best for your casting process. Anyway, you can make some parts but I'd guess that at the start they should be mostly decorative parts.

Maybe start by pouring some ingots for later use. Try machining / cutting a few and checking the quality of the casting.

And hey, go for it. We are rooting for you! We need a Mueller Fan Club smilie.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Mueller
post Mar 20 2006, 11:39 AM
Post #11


914 Freak!
***************

Group: Members
Posts: 17,146
Joined: 4-January 03
From: Antioch, CA
Member No.: 87
Region Association: None
QUOTE (davep @ Mar 20 2006, 10:30 AM)
I hear Jake needs a foundry to cast some badass heads. JK
I'd be a little concerned about the aluminum you are using. There are so many alloys designed for so many properties. I don't know if what you are planning to use is the best for your casting process. Anyway, you can make some parts but I'd guess that at the start they should be mostly decorative parts.

Maybe start by pouring some ingots for later use. Try machining / cutting a few and checking the quality of the casting.

And hey, go for it. We are rooting for you! We need a Mueller Fan Club smilie.

trust me, new heads are on the wish list.....chances are they'll stay on the wish list, but hey, it's a dream (IMG:http://www.914world.com/bbs2/html/emoticons/smile.gif)

for learning and testing the patterns and such, mixing of the alloys should be fine (as long as no zinc or magnesium gets thrown into the mix)

356 ingots are available for when I get serious and need good clean aluminum.....

I already have material for sandcasting (petrobond) and have read a few books on investment casting as well as lost foam and other methods....got to try 'em all....
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
davep
post Mar 20 2006, 12:05 PM
Post #12


914 Historian
*****

Group: Benefactors
Posts: 5,148
Joined: 13-October 03
From: Burford, ON, N0E 1A0
Member No.: 1,244
Region Association: Canada
QUOTE (Mueller @ Mar 20 2006, 09:39 AM)
356 ingots are available for when I get serious and need good clean aluminum.....

The old 356's are mostly steel, and the aluminum ones are really valuable. Hate to see you melt then down. (IMG:http://www.914world.com/bbs2/html/emoticons/rolleyes.gif)

I wonder if they used 356 alloy on any 356 chassis???
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Bleyseng
post Mar 20 2006, 12:16 PM
Post #13


Aircooled Baby!
**********

Group: Members
Posts: 13,035
Joined: 27-December 02
From: Seattle, Washington (for now)
Member No.: 24
Region Association: Pacific Northwest
Mueller, I did alot of casting in HS, aluminum, silver, bronze etc.
For the fog lite grills make a mold and then make a wax foglite grill and then make a pouring mold around than. Lost wax casting is really easy! Using the proper sand or other medium will take alittle work.
Are you sure thats going to be hot enough? We used a blower off a kirby vacuum along with the propane to blast the crucible toget it hot enough.

Get some gloves, tongs, masks etc. The metal will spit sometimes and hit you and that shit is HOT!!! burns right thru anything and HURTS.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
r_towle
post Mar 20 2006, 12:22 PM
Post #14


Custom Member
***************

Group: Members
Posts: 24,584
Joined: 9-January 03
From: Taxachusetts
Member No.: 124
Region Association: North East States
I have a perfect first project for you.
A box
basically 2.25 inch by 2.25 inch

it would have a 2 inch hole in the box, leaving an 1/8 ich bottom...

And then a cool looking airfinned top...

I can explain and send the pictures I promised log ago...

It would be a good simple, yet precise enough project that you may have some fun with it.

The type of aluminum is not that critical...

Rich
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
MikeP
post Mar 20 2006, 12:27 PM
Post #15


Member
**

Group: Members
Posts: 321
Joined: 13-June 05
From: San Jose, CA
Member No.: 4,268
I need silver bullets. don't ask. (IMG:http://www.914world.com/bbs2/html/emoticons/ar15.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
McMark
post Mar 20 2006, 01:09 PM
Post #16


914 Freak!
***************

Group: Retired Admin
Posts: 20,179
Joined: 13-March 03
From: Grand Rapids, MI
Member No.: 419
Region Association: None
MikeP, (IMG:http://www.914world.com/bbs2/html/emoticons/av-943.gif) (IMG:http://www.914world.com/bbs2/html/emoticons/lol2.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Demick
post Mar 20 2006, 01:21 PM
Post #17


Ernie made me do it!
****

Group: Benefactors
Posts: 2,312
Joined: 6-February 03
From: Pleasanton, CA
Member No.: 257
In middle school we had a forge. For our projects, we just used to bring in aluminum cans and melt them down. Not a high strength alloy, but for learning, its an cheap and easy way to get your hands on a bunch of aluminum. Just think - after you finish pouring a mold, you will now be obligated to sit back and knock back a few cool ones to replenish your supply of aluminum.

Demick
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Mueller
post Mar 20 2006, 02:07 PM
Post #18


914 Freak!
***************

Group: Members
Posts: 17,146
Joined: 4-January 03
From: Antioch, CA
Member No.: 87
Region Association: None
QUOTE (Demick @ Mar 20 2006, 12:21 PM)
In middle school we had a forge. For our projects, we just used to bring in aluminum cans and melt them down. Not a high strength alloy, but for learning, its an cheap and easy way to get your hands on a bunch of aluminum. Just think - after you finish pouring a mold, you will now be obligated to sit back and knock back a few cool ones to replenish your supply of aluminum.

Demick

I don't think Sherryl would like me "stealing" from her recycling bins (IMG:http://www.914world.com/bbs2/html/emoticons/biggrin.gif) (am I the only cheap SOB that'll pick up a can I find in the parking lot and throw it in my trunk???)

my goal is to "recycle" the aluminum from a 914 as much as I can......I'll have to get desperate for aluminum before I throw that spare GA 2.0 case into the fire (IMG:http://www.914world.com/bbs2/html/emoticons/screwy.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
rhodyguy
post Mar 20 2006, 06:02 PM
Post #19


Chimp Sanctuary NW. Check it out.
***************

Group: Members
Posts: 22,082
Joined: 2-March 03
From: Orion's Bell. The BELL!
Member No.: 378
Region Association: Galt's Gulch
cool. how many #s will your crucible hold? i wonder what will happen when you mix a few different alloys? (IMG:http://www.914world.com/bbs2/html/emoticons/dry.gif) are you going to try making your molds with Green Sand? you have to wear boots mike! don't burn yourself and have fun!

k
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
jonwatts
post Mar 20 2006, 10:46 PM
Post #20


no rules, just wrong
****

Group: Benefactors
Posts: 2,321
Joined: 13-January 03
From: San Jose, CA
Member No.: 141
How about a set of brass balls? Always nice to have spares.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
« Next Oldest · 914World Garage · Next Newest »
 

3 Pages V  1 2 3 >
Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 

Display Mode: Switch to: Standard · Linear+ · Switch to: Outline

Track this topic · Email this topic · Print this topic · Subscribe to this forum

- Lo-Fi Version Time is now: 25th May 2024 - 05:57 AM
Invision Power Board v9.1.4 © 2024  IPS, Inc.
All rights reserved 914World.com © since 2002
914World.com is the fastest growing online 914 community!
We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ...