best control arm bushings for track |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
best control arm bushings for track |
kevgentile |
Apr 13 2006, 08:21 PM
Post
#1
|
Member Group: Members Posts: 55 Joined: 14-January 05 From: gaithersburg, md Member No.: 3,448 |
car had weltsheister poly-graphite bushings front and rear. then it was a street/track car with 15x7's, now dedicated track car with 10's and 12's. have not had much experience with other bushing's so would like to know who is using what for their race 914. thanks
|
Brad Roberts |
Apr 13 2006, 08:31 PM
Post
#2
|
914 Freak! Group: Members Posts: 19,148 Joined: 23-December 02 Member No.: 8 Region Association: None |
I know what my typical reply is, but I dont think Mike wants to sell anymore of them. So.. I have to say the Elephant racing poly bronze setup is the next best thing to a complete roller bearing setup. I spent this past weekend with Chuck at a POC event (Chuck owns Elephant racing) and watched several cars from behind (until I passed them..LOL) It works well. Check into it.
B |
r_towle |
Apr 13 2006, 08:37 PM
Post
#3
|
Custom Member Group: Members Posts: 24,577 Joined: 9-January 03 From: Taxachusetts Member No.: 124 Region Association: North East States |
Shine Racing in MA still sells roller bearings for the 914
http://www.srsvw.com/parts/partdetail.asp?pid=118 |
kevgentile |
Apr 13 2006, 08:41 PM
Post
#4
|
Member Group: Members Posts: 55 Joined: 14-January 05 From: gaithersburg, md Member No.: 3,448 |
thanks brad, i was just on elephant's web site. their poly-bronze set-up looks like it is an improvement over anything other then a roller bearing set-up. i would love to do the roller bearing, need to look into it.
|
kevgentile |
Apr 13 2006, 08:48 PM
Post
#5
|
Member Group: Members Posts: 55 Joined: 14-January 05 From: gaithersburg, md Member No.: 3,448 |
shine has the front roller bearing. thanks r_towle.
anybody make/sell a rear set-up? |
kevgentile |
Apr 13 2006, 08:56 PM
Post
#6
|
Member Group: Members Posts: 55 Joined: 14-January 05 From: gaithersburg, md Member No.: 3,448 |
anybody here use renegade hybrid's rear roller bearing set-up?
|
Lo-Fi Version | Time is now: 21st May 2024 - 06:18 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |