Goodyear Answers My Cantilever Slick Questions, I did some homework on rim width alternatives |
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
Goodyear Answers My Cantilever Slick Questions, I did some homework on rim width alternatives |
nine14cats |
May 24 2006, 12:06 AM
Post
#1
|
Bill Pickering -- 914-6 GT aka....Leeloo Group: Members Posts: 2,618 Joined: 10-February 03 From: Campbell, CA Member No.: 287 Region Association: None |
A few days ago we were discussing the Goodyear Cantilever Slicks in R250 and R430 compounds for tire size 23x9x15 that are a very common alternative tire for 914's when Autocrossing and running the track.
I first had e-mailed Goodyear Headquarters directly for some information related to my non cantilever slicks I run on my 911 (Fritz). I received an e-mail where Goodyear directed me to their official Western Region Territory race tire distributors for all technical questions related to their race slicks: Carroll Shelby Enterprises, Inc. 19021 S. Figueroa St. Gardena, California 90248 PHONE: 310/538-2914 FAX: 310/538-1815 Website: www.carrollshelbyent.com I e-mailed Shelby and explained my situation. I also sent a separate e-mail concerning the canti's and the rim width question. I asked could the canti's be run on 8 inch rims and were there any performance gains, losses, safety issues or concerns. Here is the response I received from the Shelby / Goodyear representative: From: Daryl Duncan - Carroll Shelby Enterprises "The 23x9-15 performs better on the 8" wheel. The wider wheel keeps the tread patch flatter which will give you more grip. It also supports the sidewall (makes it a little stiffer) so the car should turn in better. As far as safety goes there is no difference between the two. Wear should increase on the 8" wheel." After receiving this e-mail I called Shelby Enterprises and asked why the literature calls out 7 inch rims only. They said that it is recommended rim width based on the fact that the majority of racers using the Canti's are in spec classes where the wheel rim width is mandated by the rules. If racer's such as ourselves want to go with a different rim, we usually call in to Goodyear and they tell us it's okay to do so or not given the application. In this instance 8 inch rims are not a problem. For kicks I also called one of the two approved Goodyear distributors for racing tires in the Southeastern Territory. Competition Tire South, Inc. 771-28 Fentress Blvd. P.O. Box 11586 Daytona Beach, Florida 32120-1586 PHONE: 386/274-5332 FAX: 386/274-5442 Competition tire told me pretty much the same story as Shelby Enterprises and also said that they encourage AX guys to use the 8 inch rim for better turn in. Finally, I talked with one of Goodyear's Product Marketing managers at their Corporate Headquarters in Akron, Ohio. I had left a message on his voice mail since he is traveling on business until June 1st, but he called me back personally. I'd have to say that I have been impressed by Goodyear's people just like I have been impressed by Hoosier's people in the past. I think we may be pretty lucky to have these two vendors to put shoes on our 914's. The Goodyear Tire & Rubber Company 1144 East Market Street Akron, Ohio 44316-0001 (330) 796-2121 Fax: (330) 796-2222 The Goodyear Product Manager told me that the cantilever slicks were designed to accomodate a range of 6 inch to 8 inch rims with no safety issues. Goodyear wanted to be able to offer the product to more than just one rim segment. It just so happenned that the majority of sales goes into the spec classes, versus us recreational "run what you brung" guys at local AX's or driving clubs. It appears from Goodyear's own admission that running 8 inch rims is an acceptable practice and may be of performance benefit for the AX guys / gals. At the very least, every one of the Goodyear representatives including one of their Corporate product marketeers stated it was safe. Since many of us are running or are thinking of running canti's, I thought this information may be of interest. (IMG:style_emoticons/default/smile.gif) Bill P. |
Joe Ricard |
May 24 2006, 05:15 AM
Post
#2
|
CUMONIWANNARACEU Group: Members Posts: 6,811 Joined: 5-January 03 From: Gautier, MS Member No.: 92 |
I got my "tire take off" guy on speed dial. He's getting a call today.
WHOO HOOO!!!!!! |
groot |
May 24 2006, 05:57 AM
Post
#3
|
Dis member Group: Members Posts: 894 Joined: 17-December 03 From: Michigan Member No.: 1,444 |
Good work, Bill!!
|
McMark |
May 24 2006, 06:14 AM
Post
#4
|
914 Freak! Group: Retired Admin Posts: 20,179 Joined: 13-March 03 From: Grand Rapids, MI Member No.: 419 Region Association: None |
Bill thanks for doing all that leg work. It's great to get legitimate, cross-checked information. Pretty bullet proof information, IMHO. (IMG:style_emoticons/default/smiley_notworthy.gif)
|
Trekkor |
May 24 2006, 08:36 AM
Post
#5
|
I do things... Group: Members Posts: 7,809 Joined: 2-December 03 From: Napa, Ca Member No.: 1,413 Region Association: Northern California |
Thanks Bill.
I've never heard of any tire that only fits one rim size. Fitting a range of tires brings this back to Earth. Great info...From the top. KT |
nine14cats |
May 24 2006, 09:36 AM
Post
#6
|
Bill Pickering -- 914-6 GT aka....Leeloo Group: Members Posts: 2,618 Joined: 10-February 03 From: Campbell, CA Member No.: 287 Region Association: None |
We should also see if anyone has success at charting out their laps times and wear in the Goodyear versus Hoosier canti's. The GY R250 seems to be the softest (or softer than Hoosier) but my own experience has been that whenever I've compared the two companies running them in back to back sessions, I've been faster with the Hoosiers. But it hasn't been scientific in my test and 1.5 seconds difference over a 3 mile track is most likely driver variation more than anything else.
I do remember that the Hoosier canti's would lose alot of air overnight, while the GY's did not. I've been tire testing the non-canti slicks on Fritz and so far neither brand loses air overnight, so it may be that my rims for the 914 has something to do with it. P.S. As a side note, GY told me to pump up the air pressure in the back tires of my 911 to help keep it from rolling over and grabbing during an AX. I will have to find the optimum balance between traction and skating. For the weight of my car (~2500lbs) I need around 28lbs hot versus 24 I was running. Bill P. |
race914 |
May 24 2006, 09:47 AM
Post
#7
|
73 914-4 Group: Members Posts: 1,006 Joined: 31-October 05 From: Nipomo, California (Central Coast) Member No.: 5,027 Region Association: Central California |
Bill,
Thanks for all of the leg work! You just saved me from buying a set of 7" rims for Tricia's car. Nice to know we can run the slicks on the 8"s we have.. Greg |
Joe Ricard |
May 24 2006, 09:50 AM
Post
#8
|
CUMONIWANNARACEU Group: Members Posts: 6,811 Joined: 5-January 03 From: Gautier, MS Member No.: 92 |
Yea what Greg said. My 15 x 8 Diamonds are gonna be just fine.
However my Centerlines are 8.5" wide Hmmmmm..... |
URY914 |
May 24 2006, 09:57 AM
Post
#9
|
I built the lightest 914 in the history of mankind. Group: Members Posts: 120,354 Joined: 3-February 03 From: Jacksonville, FL Member No.: 222 Region Association: None |
I think these tires are used for the front tires of SCCA Formula Atlantic cars which probably have the 7" wheel as thier standard size. That's why it is lised on the charts that way.
Don't know it is true but I think someone told me that. |
nine14cats |
May 24 2006, 10:03 AM
Post
#10
|
Bill Pickering -- 914-6 GT aka....Leeloo Group: Members Posts: 2,618 Joined: 10-February 03 From: Campbell, CA Member No.: 287 Region Association: None |
Hi Guys,
Just remember about the slicks liking little to zero camber versus dot-r's for optimal performance. The Hoosier canti's seem to like slightly more camber than the GY's. I'd check with Chris Foley, Kevin Groot or John Rogers on their recommendations. I believe they have run with both brands. In any event, less than 1 degree negative is the starting point for 914's and probably closer to 0.5 negative in practice. Bill P. |
grantsfo |
May 24 2006, 10:07 AM
Post
#11
|
Arrrrhhhh! Group: Members Posts: 4,327 Joined: 16-March 03 Member No.: 433 Region Association: None |
Thanks Bill. Now thats some good info that can be validated. Nice to hear from the experts on this issue.
|
URY914 |
May 24 2006, 10:29 AM
Post
#12
|
I built the lightest 914 in the history of mankind. Group: Members Posts: 120,354 Joined: 3-February 03 From: Jacksonville, FL Member No.: 222 Region Association: None |
Hi Guys, Just remember about the slicks liking little to zero camber versus dot-r's for optimal performance. The Hoosier canti's seem to like slightly more camber than the GY's. I'd check with Chris Foley, Kevin Groot or John Rogers on their recommendations. I believe they have run with both brands. In any event, less than 1 degree negative is the starting point for 914's and probably closer to 0.5 negative in practice. Bill P. With this info, I'm changing my set up tonight. |
Joe Ricard |
May 24 2006, 10:55 AM
Post
#13
|
CUMONIWANNARACEU Group: Members Posts: 6,811 Joined: 5-January 03 From: Gautier, MS Member No.: 92 |
Paul, we are not talking baout your tires, or mine. Yes our tires are designed for Formula atlantic cars. Explains the paper thin sidewalls. Actual recommended rim for our tires is 10' wide. Completely a horse of a different color. Did you notice your car was slower to turn in? I did compared to DOT R Hoosiers. I figure I will hammer these out for all they are worth and then get some canti's Then again if I get another road course event set up well .... I'll just have to get used to sleeping in the dog house. With this info, I'm changing my set up tonight. [/quote] |
URY914 |
May 24 2006, 11:02 AM
Post
#14
|
I built the lightest 914 in the history of mankind. Group: Members Posts: 120,354 Joined: 3-February 03 From: Jacksonville, FL Member No.: 222 Region Association: None |
Joe, I just said that to throw off the other guys. (IMG:style_emoticons/default/cool_shades.gif)
|
jhadler |
May 24 2006, 11:34 AM
Post
#15
|
Long term tinkerer... Group: Members Posts: 1,879 Joined: 7-April 03 From: Lyons, CO Member No.: 529 |
I think these tires are used for the front tires of SCCA Formula Atlantic cars which probably have the 7" wheel as thier standard size. That's why it is lised on the charts that way. Don't know it is true but I think someone told me that. It's not just FA, it's a host of classes. Most of the cars in the smaller displacement production classes are spec wheel widths of 7". -Josh2 |
jhadler |
May 24 2006, 11:38 AM
Post
#16
|
Long term tinkerer... Group: Members Posts: 1,879 Joined: 7-April 03 From: Lyons, CO Member No.: 529 |
Paul, we are not talking baout your tires, or mine. Yes our tires are designed for Formula atlantic cars. Explains the paper thin sidewalls. Actual recommended rim for our tires is 10' wide. Completely a horse of a different color. Did you notice your car was slower to turn in? I did compared to DOT R Hoosiers. Bias Ply slicks will always have slower turn-in compared to DOT radials. The soft treadface of a bias ply means that the treadface will deform first when turning before the tire will take a set. With radials, the treadface is very rigid and will respond to directional changes much more quickly. They'll also break away much more readilly. This is why slicks can hide driving errors more than radials. And it takes a deliberate effort to setup a turn on slicks, you need to anticipate much more. Radials are going to be more responsive, but it also makes them harder to drive at the limit. Typically, radials operate with much smaller slip angles than slicks do. -Josh2 |
john rogers |
May 24 2006, 12:08 PM
Post
#17
|
Senior Member Group: Members Posts: 1,525 Joined: 4-March 03 From: Chula Vista CA Member No.: 391 |
A few old time SCCA tech folks told me the cantilever slick was invented just to be a thorn in the SCCA's side as their wheel/tire spec used to and in many cases still do call for rim width and not tire width as the standard. No one ever thought that you could actually have a tire that would be wider than the rim and actually work. On my car we run zero camber in front and about negative 0.5 degree in the rear due to the rear end coming up under braking and sometimes turn in. With thee settings tire temps are equal across the tire contact patch. I usually run 22# cold at a track like the CA speedway to start and end with 26 to 27# hot after a 30 minute race.
|
J P Stein |
May 24 2006, 12:33 PM
Post
#18
|
Irrelevant old fart Group: Members Posts: 8,797 Joined: 30-December 02 From: Vancouver, WA Member No.: 45 Region Association: None |
|
nine14cats |
May 24 2006, 12:37 PM
Post
#19
|
Bill Pickering -- 914-6 GT aka....Leeloo Group: Members Posts: 2,618 Joined: 10-February 03 From: Campbell, CA Member No.: 287 Region Association: None |
Hi John,
How much does your car weigh? I'm interested in the weight versus hot tire pressure values. Thanks! Bill P. |
groot |
May 24 2006, 12:50 PM
Post
#20
|
Dis member Group: Members Posts: 894 Joined: 17-December 03 From: Michigan Member No.: 1,444 |
I run .5 to .75 degrees of camber front and rear and close to zero toe as I can get.
Tire temps ... Since these tires have a distinct band around the middle I'm taking tire temps at 4 spots across the tire to avoid that band. That band has to upset the data.... I shoot for 25 psi hot, which means I start at 17-18 psi. I really doubt you could get that much heat into a tire at an auto-x, so your mileage may vary. Bill, that sounds like a question for goodyear. I'm pretty sure the hot pressure target should be the same regardless of the load on the tire. Are you running equal size tires on your 911? I have enough of a rear weight bias (54%) on my 914 that I'm going to downsize my front tire with the next purchase (probably this weekend). I typically get more heat in the rear tires sooner. |
Lo-Fi Version | Time is now: 4th May 2024 - 03:38 AM |
All rights reserved 914World.com © since 2002 |
914World.com is the fastest growing online 914 community! We have it all, classifieds, events, forums, vendors, parts, autocross, racing, technical articles, events calendar, newsletter, restoration, gallery, archives, history and more for your Porsche 914 ... |