 Fuch 16 7's, will they work on a stock 914? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
  |
| proto31 |
 Jun 10 2006, 05:59 PM
Post
#1
|
|
Member  Group: Members Posts: 413 Joined: 2-February 06 From: Costa Mesa, CA. Member No.: 5,515 Region Association: None   |
Will a set of 16X7 fuchs fit on the rear of my early 914-6? the fenders have not been rolled. I've heard different opinions. The wheels come with some 205 tires that I will probably have to swap out with 195's, but just wondering if I could make these work?
|
   |
 
|
| Joe Bob |
Jun 10 2006, 06:11 PM
Post
#2
|
|
Retired admin, banned a few times Group: Members Posts: 17,427 Joined: 24-December 02 From: Boulder CO Member No.: 5 Region Association: None |
Barely....fronts should be no problem....it's the rears that may require the bat treatment to the fender lips....depends on the tire manufacturer.
|
|
|
|
| Porsche Rescue |
Jun 10 2006, 06:36 PM
Post
#3
|
|
Saving and Enjoying Old Porsches Group: Members Posts: 2,978 Joined: 31-December 02 From: Bend, Oregon Member No.: 64 Region Association: None |
I have installed 7x16 with 205/45's but had to roll the fender lips.
I would use 195/55's and you should have no problem. The tires are the problem, not the wheels. |
|
|
|
| scottb |
Jun 10 2006, 07:50 PM
Post
#4
|
|
who wants a PEZ?! Group: Members Posts: 1,993 Joined: 27-December 02 From: south-(not north)-wick, MA Member No.: 32 Region Association: North East States |
have 16x7's all the way around with 205/55's...... no rub and didn't need a roll in the back....
|
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 27th May 2024 - 10:41 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.