 Ignition Tumbler 73, Need Ignition Tumbler |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| jperret |
 Jun 27 2006, 05:05 PM
Post
#1
|
|
Newbie  Group: Members Posts: 27 Joined: 15-April 06 Member No.: 5,868  |
I have a worn out ignition switch tumber for my '73 914 2.0L.
I was able to find a VW part to replace the whole ignition lock/swich assemble. It work great, but who wants to carry around a VW key! The VW key pattern is very different from the porsche. So I tried to switch back to the Porsche key cylinder. The cylinder is worn so badly several of the tumblers stick up when the key is insterted. This worked OK in the old lock because it was so worn. I could just file them down and move on, but I want to do the job right. I could not use the tumblers from the VW part, they were thicker. Any one know of a source for the ingition key cylinder? I noticed my '98 911 has the same key pattern, any chance the cylenders are the same? |
   |
 
|
Posts in this topic
jperret Ignition Tumbler 73 Jun 27 2006, 05:05 PM
Joe Sharp First of all :wttc:
I can't really help you w... Jun 27 2006, 06:09 PM
Thack You can find them on ebay from time to time. I fou... Jun 27 2006, 06:15 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 19th May 2024 - 11:34 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.