 will these calipers work on my 914? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| rfuerst911sc |
  Apr 7 2007, 07:12 AM
Post
#1
|
|
Advanced Member  Group: Members Posts: 2,158 Joined: 4-May 06 From: Dahlonega , Georgia Member No.: 5,980 Region Association: South East States  |
I have 1972 911 Boge struts on the front of my 914 and I am still trying to figure out what brakes I will use front and rear. I know many people think the 1974 and later 3.5 inch struts are better but I have these and I'm gonna use them. My question is can you run rear Carrera ( 1984-1989 ) calipers on the front? If I understand this correctly this would give me a 24mm front rotor with caliper pistons that would work well with M calipers in the rear with a adjustable proportioning valve, anyone running this setup? I am going to install a 19mm master cylinder. This will be a street/autocross machine with occasional DE's thrown in. Oh yea I'll be throwing in a 911 engine too!! Any thoughts on this brake setup?
|
   |
 
|
Posts in this topic
rfuerst911sc will these calipers work on my 914? Apr 7 2007, 07:12 AM
davep That does not make sense. They are only 42mm pisto... Apr 7 2007, 08:19 AM rfuerst911sc davep any suggestions on what caliper/rotor combo ... Apr 7 2007, 10:45 AM Aaron Cox basically for now all you can run are the 3" ... Apr 7 2007, 11:33 AM Eric_Shea Run M-Calipers up front as suggested.
Run 914 ... Apr 7 2007, 11:43 AM Eric_Shea
More...
If you're in the 150 range the set... Apr 7 2007, 11:46 AM rfuerst911sc Eric if I go with the OEM 911 front M caliper with... Apr 7 2007, 03:35 PM rfuerst911sc And what size pistons are in the rear calipers on ... Apr 7 2007, 04:26 PM davep all 914/4 had 33mm pistons
all 914/6 & the sug... Apr 7 2007, 05:13 PM Eric_Shea
That's "basically" what a 911 of t... Apr 8 2007, 12:56 AM davep The basic 911 setup (from 110 to 190 HP) was the 4... Apr 8 2007, 07:51 AM rfuerst911sc So the 914 rear caliper has 33mm pistons. The 911 ... Apr 8 2007, 11:59 AM
davep
So the 914 rear caliper has 33mm pistons. The 911... Apr 8 2007, 07:30 PM Eric_Shea I would not recommend hydraulic:
Line locks are u... Apr 8 2007, 12:16 PM bigkensteele :popcorn: .. Been sitting on a set of 70T struts a... Apr 8 2007, 08:35 PM Eric_Shea
You could but I recommend setting up the factory... Apr 9 2007, 09:16 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 19th May 2024 - 05:28 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.