 Torsion bar adjuster HELP ASAP! please |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| tweeter |
 May 1 2007, 11:30 AM
Post
#1
|
|
Newbie  Group: Members Posts: 36 Joined: 26-April 07 From: new jersey Member No.: 7,694  |
here is what i started with...it was stripped and wouldnt even turn...so i was told to cut the top and bottom off the bolt and the cap would come off, replace cap and bolt...
(IMG:http://i3.photobucket.com/albums/y93/jimtweet18/Picture011.jpg) well i cut the top off the bolt and the cap SPRUNG LOUD as hell up, this thing is under crazy pressure i think, what do i do? (IMG:http://i3.photobucket.com/albums/y93/jimtweet18/Picture012.jpg) |
   |
 
|
Posts in this topic
tweeter Torsion bar adjuster HELP ASAP! please May 1 2007, 11:30 AM
rhodyguy did you spray the screw down with pb blaster first... May 1 2007, 11:35 AM sww914 Cut the bolt head off now and pry the cap out of t... May 1 2007, 11:41 AM Brando This might seem silly... But are you doing this wi... May 1 2007, 12:18 PM Dr. Roger that first pic shows it tightened all the way in.
... May 1 2007, 02:17 PM
tweeter
that first pic shows it tightened all the way in.... May 1 2007, 05:25 PM rhodyguy can you pull the bar backwards and out with the ca... May 1 2007, 05:48 PM SirAndy
here is what i started with...it was stripped and... May 2 2007, 12:08 AM tweeter
here is what i started with...it was stripped an... May 2 2007, 06:14 AM Spoke If you've got the bolt cut off the only thing ... May 2 2007, 10:22 AM rhodyguy if the torsion bar is stuck/rusted in the front of... May 2 2007, 11:37 AM Eric_Shea :agree: I, once again, find myself agreeing with ... May 2 2007, 11:50 AM rhodyguy the beehiver has got some good suggestions. but as... May 2 2007, 12:21 PM 9146986 Looks to me like you ruined a perfectly good adjus... May 3 2007, 07:03 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 18th May 2024 - 07:28 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.