 Help with cam ID |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
  |
| Al Meredith |
 Oct 20 2007, 11:23 AM
Post
#1
|
|
Senior Member  Group: Members Posts: 960 Joined: 4-November 04 From: Atlanta, ga Member No.: 3,061  |
I built and 1800 CC race engine for a NASA 914 ( dynoed at 96 RWHP at 5000 RPM and 108 torque from 2800 to 4600 RPM) This engine was to replace one that
totally ruined one cylinder (Chinese 96MM) after a very short time. I took this engine apart and found a new cam and lifters. The marking on the cam are "C 2 O" Large C small 2 and what looks like a large O (partially obscured by the gear. Any one know who made this cam ???? |
   |
 
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 18th May 2024 - 06:46 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.