 Spark plug hole covers |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
  |
| blitZ |
 Nov 9 2007, 05:18 PM
Post
#1
|
|
Beer please...  Group: Members Posts: 2,223 Joined: 31-August 05 From: Lawrenceville, GA Member No.: 4,719 Region Association: South East States  |
I have some Magnacore plug wires which work great, however the plug hole covers are worthless. After a little heat they shrivel up to nothing. So, I made some covers using some ducting metal from Home Depot and heavy duty felt for placing under furniture. I cut the metal in a pi shape after measuring the diameter of the plug boot and the plug opening, using tin snips. Next, cut the felt to match leaving a slice to install over the wire. The felt is self adhering and sticks right on the metal. Just snug it up to the engine tin.
I've been driving around for a few weeks and they stay put. I was concerned the felt might not hold up from the heat, but it has not been effected. Thought I would pass this along to help keep your engine cool. Attached image(s)  
|
   |
 
|
| Dr Evil |
Nov 9 2007, 05:54 PM
Post
#2
|
|
Send me your transmission! Group: Members Posts: 22,995 Joined: 21-November 03 From: Loveland, OH 45140 Member No.: 1,372 Region Association: MidAtlantic Region 
|
|
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 17th May 2024 - 05:58 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.