 ear crack, uhhh oohh |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
  |
| d914 |
 Nov 25 2007, 12:21 PM
Post
#1
|
|
Advanced Member  Group: Members Posts: 2,331 Joined: 12-July 03 From: Atlanta, ga Member No.: 904 Region Association: South East States  |
preping for the RacerChris rear suspension kit and look at what I found!!!
So hopefully the plan is to weld the crack, weld on the ear kit, and then weld in the inner and outer console kit.......Good????   |
   |
 
|
| dr914@autoatlanta.com |
Nov 25 2007, 12:42 PM
Post
#2
|
|
914 Guru Group: Members Posts: 7,869 Joined: 3-January 07 From: atlanta georgia Member No.: 7,418 Region Association: None |
that is easy to reweld and not suffer the time and expense of replacement |
|
|
|
| d914 |
Nov 25 2007, 12:44 PM
Post
#3
|
|
Advanced Member Group: Members Posts: 2,331 Joined: 12-July 03 From: Atlanta, ga Member No.: 904 Region Association: South East States |
your a scholar and a gentleman!!
GregD |
|
|
|
| SirAndy |
Nov 25 2007, 01:55 PM
Post
#4
|
|
Resident German Group: Admin Posts: 41,651 Joined: 21-January 03 From: Oakland, Kalifornia Member No.: 179 Region Association: Northern California |
looks like a stress crack and not a rust issue, so (IMG:style_emoticons/default/agree.gif) with the Dr. .... weld her up and add the kit, that should work just fine ...
(IMG:style_emoticons/default/sawzall-smiley.gif) (IMG:style_emoticons/default/smash.gif) (IMG:style_emoticons/default/welder.gif) Andy |
|
|
|
| d914 |
Dec 16 2007, 07:58 AM
Post
#5
|
|
Advanced Member Group: Members Posts: 2,331 Joined: 12-July 03 From: Atlanta, ga Member No.: 904 Region Association: South East States |
ok here is the after:
racer chris's ear piece inner console support outter console support I don't think this one is going anywhere!!! Attached image(s) 
|
|
|
|
| d914 |
Dec 16 2007, 08:09 AM
Post
#6
|
|
Advanced Member Group: Members Posts: 2,331 Joined: 12-July 03 From: Atlanta, ga Member No.: 904 Region Association: South East States |
here is a shot of the outter and where the wedge piece goes in tying in the whole thing. STill just tacked. I'll show the otherside but the welds are a bit ugly, metal got thin in places from rust in the hell hole area. Planning on fixing that today..
  |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 23rd May 2024 - 06:56 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.