 Spoke's 71 2.056L 914 Progress Thread, Driving it Like I Stole It |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| Spoke |
 Dec 28 2007, 10:59 PM
Post
#1
|
|
Jerry  Group: Members Posts: 6,979 Joined: 29-October 04 From: Allentown, PA Member No.: 3,031 Region Association: None 
 |
Like Zach said before, just what the World needs is another progress thread. So here it is for my 71 1.7L red ride.
I'm working on an engine swap for my leaky 1.7L with slipping clutch to a non-leaking, unknown GEX rebuilt 1.8L so I decided to concatenate several threads on this car into one progress thread. Eventually I will sell the red 71 and keep the green 74 as my only 914. For now the plan is to get the new 1.8L engine in the car. The 1.8L has SSHE where the 1.7L in the car has very much corroded stock HE's. Here's pics after last year's rear end accident that totaled the car and the finished product after many months of rehab. Attached image(s)     
|
   |
 
|
Posts in this topic
Spoke Spoke's 71 2.056L 914 Progress Thread Dec 28 2007, 10:59 PM
Spoke While studying the classic clutch tube repair thre... Dec 6 2009, 07:40 PM Spoke I made a bracket for the front of the tube. There ... Dec 6 2009, 10:10 PM Spoke I used Duplicolor's Rust Fix to prepare the me... Dec 9 2009, 01:20 AM Spoke Got the tube all straightened out and then bent in... Dec 9 2009, 01:22 AM Spoke So I had to pull the 911 out of the garage to work... Dec 9 2009, 01:24 AM Spoke Getting ready to weld the clutch tube in. The fron... Dec 10 2009, 10:28 PM Spoke Finally welded the tube in. I made the front brack... Dec 10 2009, 10:35 PM Spoke This plate is 2 plates, a large 14 gauge plate and... Dec 10 2009, 10:40 PM Spoke I didn't think the drivers side was as bad as ... Dec 19 2009, 10:26 PM Spoke Started cutting out the bad stuff. All the rust on... Dec 19 2009, 10:37 PM Spoke First piece to fab is the inside long. All final c... Jan 16 2010, 04:29 PM Spoke Well, no 914 work going on today. Focus today is t... Jan 17 2010, 03:49 PM Spoke Well, I'm not working on the 914 but at least ... Jan 22 2010, 08:20 PM Spoke Calling the Cap'n: Does this rear drive look o... Jan 22 2010, 09:44 PM Spoke Still working on the 911. Trying to remove the rea... Jan 24 2010, 12:15 PM Spoke Still no 914 content. I finally got the inner swin... Jan 30 2010, 02:39 PM Spoke Still no 914 content.
Finally got the trailing ar... Jan 31 2010, 08:19 AM Spoke Got the 911 back together :trophy: :headbanger: ... Feb 10 2010, 06:47 AM Spoke Back to my regularly scheduled 914 rustoration:
T... Feb 10 2010, 07:02 AM Spoke Piece for the floor out of 18ga.
And welded in
... Feb 10 2010, 09:22 PM Spoke Engine firewall repair piece under the driver heat... Feb 10 2010, 09:25 PM Spoke Triangle pieces by Spoke out of 16ga. Cost per pie... Feb 10 2010, 09:27 PM rick 918-S :sawzall: :smash: :welder: :thumbsup: Feb 10 2010, 11:05 PM Spoke Yet another reason why I'm not working on my 9... May 3 2010, 06:12 PM Spoke Finally done with my Audi heater fan, other Audi t... May 10 2010, 09:31 PM Spoke Found some rust on the engine mount. What a shock. May 11 2010, 09:41 PM Spoke Finished up the last of the welding in the engine ... May 11 2010, 09:57 PM Spoke While poking the inside of the engine mount, I pok... May 14 2010, 10:45 PM Spoke The long is gone behind the engine mount. Look Ma,... May 14 2010, 11:32 PM wayne1234 I was in the same situations a few months ago on m... May 15 2010, 09:28 PM Spoke The bolts that secure the swing arm adjustment pla... May 17 2010, 09:41 PM Spoke Finally finished with the engine mount.
This is t... May 17 2010, 09:54 PM Spoke I welded a similar 16ga plate on the passenger sid... May 23 2010, 04:12 PM Spoke Finally finished all the welding in the engine com... Jun 4 2010, 09:01 PM Spoke More Paint... Jun 4 2010, 09:32 PM Spoke More paint... Jun 4 2010, 09:34 PM Spoke Cleaned and painted the suspension pieces.
Next s... Jun 6 2010, 06:21 AM Spoke Finally on 4 wheels again. The jackstands are idle... Jun 7 2010, 07:30 PM Spoke Welded up the hole in the fender and the weatherst... Jun 18 2010, 06:55 AM Spoke Welded and ground down the 2 patches on the driver... Jun 21 2010, 09:13 PM Spoke Next project is the passenger side corner drip edg... Jun 21 2010, 09:16 PM Spoke So after about 3 months of contemplation of how to... Jun 21 2010, 09:30 PM Spoke Welded the drip edge in. Not my best work but it w... Jun 28 2010, 08:15 PM Spoke Welded the angle iron to stiffen the hood shock mo... Jun 28 2010, 10:08 PM Spoke Cut out the trap door for the fuel pump. Since the... Jul 1 2010, 04:33 AM FourBlades Nice repair work man. :trophy:
That cowl area ... Jul 1 2010, 06:24 AM Spoke Fuel pump door is in. Drilled 4 holes for bolts an... Jul 2 2010, 05:42 AM Spoke Ran new hard brake lines in the engine compartment... Jul 4 2010, 12:46 PM Spoke Hole, what hole? Since I will plumb the gas tank s... Jul 4 2010, 02:18 PM Spoke Done welding and paint stripping in the tank compa... Jul 8 2010, 11:38 PM Spoke I thought I was done with the welding in the tank ... Jul 10 2010, 01:01 PM Spoke Closed up the hole for the antenna into the tank c... Jul 11 2010, 08:27 PM Spoke The e-brake cables were broken when I purchased th... Jul 11 2010, 10:58 PM Spoke All the metal work is done around the gas tank. No... Aug 1 2010, 08:04 PM Spoke Mounted air deflectors. Now the engine cooling sys... Aug 1 2010, 08:07 PM Spoke I decided instead of welding the pieces that I cut... Aug 1 2010, 08:14 PM Spoke Finally getting ready to paint the tank area and c... Aug 9 2010, 09:37 PM Spoke Finally, it's gas tank compartment and cowl pa... Aug 14 2010, 11:46 AM Spoke Paint is on.
Next tasks after paint cleanup is to... Aug 15 2010, 03:12 AM Spoke While I'm in there: I'll paint the rear sw... Aug 15 2010, 10:54 AM Spoke Tunnel SS fuel lines in. Engine compartment SS fue... Aug 16 2010, 08:31 PM Root_Werks This looks like another 914 saved from the rust mo... Aug 17 2010, 01:16 PM Spoke Fixing a hole in the vent.
A little 22ga patch... Aug 19 2010, 10:59 PM Spoke Fixing another hole this time in the fresh air fan... Aug 20 2010, 04:38 AM Spoke All of the air handling equipment is back in along... Aug 20 2010, 07:15 AM Spoke Turned the car around to get it in position for en... Aug 21 2010, 04:35 PM Spoke Got the firewall shift bushing in. Boiled the bush... Aug 21 2010, 04:43 PM Spoke Before the engine goes in, there are a few things ... Aug 21 2010, 04:48 PM Spoke Not much left of this o-ring. There was plenty of ... Aug 22 2010, 01:13 AM Spoke Got the pushrod tube o-rings put in and adjusted v... Aug 22 2010, 06:51 PM Spoke Tested the fuel pump relay by grounding pin III of... Aug 22 2010, 06:52 PM Spoke Before installing the engine, I would like to clea... Aug 22 2010, 07:02 PM Gigamight I have no answer for you, but I am anxiously await... Aug 22 2010, 09:10 PM messix dish soap and a bottle brush Aug 22 2010, 09:38 PM Spoke Getting the alternator back together. I needed to ... Aug 23 2010, 07:06 AM jaxdream Also might could try using some spray on / in oven... Aug 23 2010, 07:07 AM Spoke Fabbed the fuel pump mounting tonight. I started w... Aug 25 2010, 08:29 PM Spoke Pulled the tunnel fuel lines and bent them a littl... Aug 28 2010, 11:19 AM Spoke Fired up the engine before starting the install. I... Aug 28 2010, 11:40 AM Spoke Engine is installed!!!
It was a one m... Aug 28 2010, 08:50 PM Spoke My 71 is now a sideshift car. Aug 28 2010, 11:28 PM Spoke First Drive!! It runs ok, doesn't idle... Aug 29 2010, 04:03 PM rick 918-S Nice progress. I remember when that car was whacke... Aug 29 2010, 08:00 PM FourBlades Excellent!!! :Qarl:
It is such a g... Aug 29 2010, 09:02 PM Spoke PA State inspected! :Qarl: :cheer: :headban... Sep 11 2010, 12:55 PM Spoke Update: The engine is running real nice now. I had... Oct 17 2010, 11:58 AM Spoke Strip paint in the morning, prime and paint all in... Oct 19 2010, 08:32 PM Spoke Got the engine lid back together. It's amazing... Oct 21 2010, 09:03 PM Jon Fernandes Looking good! :cool: Oct 21 2010, 09:07 PM Spoke I made a center console (actually this is the 2nd ... Nov 17 2010, 08:12 PM Spoke Install goes like clockwork.
Speaking of clo... Nov 17 2010, 08:47 PM Spoke Got the oil temp sender installed. Had to make the... Nov 24 2010, 04:38 PM Spoke Remounted the muffler heat shield. I mounted it be... Nov 24 2010, 10:15 PM arkitect Jerry,
Great build thread, enjoyed the picts of al... Nov 25 2010, 10:57 PM
Spoke
Jerry,
Great build thread, enjoyed the picts of a... Nov 26 2010, 06:29 AM Spoke Just arrived this weekend.
They're not pretty... Dec 5 2010, 11:11 PM Spoke Removed the anodizing with EZ-Off. Dec 8 2010, 06:57 AM Spoke Oh, yeah, the wheel deal included center caps. Dec 8 2010, 04:57 PM rdauenhauer Go Man Go! Dec 8 2010, 05:59 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 19th May 2024 - 02:54 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.