 Cylinder head Q |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| village idiot |
 Mar 9 2008, 12:29 AM
Post
#1
|
|
Member  Group: Members Posts: 65 Joined: 15-September 07 From: Honolulu Member No.: 8,120 Region Association: None  |
Are they side specific? What I mean is, I see in the rocker boxes there's a number cast in the middle. One has a "1" and the other has a "2". Reason I ask is I just had new guides installed as well as the seats/valves resurfaced as well as the head sealing surface.
Now after installing the heads and trying to set the valves, I've had to back the adjusters waaay off just to get the rocker shaft/rockers back on. This doesn't seem normal to me, and I double checked to make sure the pushrods are seated correctly in the lifters. Am I missing something here? Help! I want to put this car back together and enjoy it! |
   |
 
|
Posts in this topic
village idiot Cylinder head Q Mar 9 2008, 12:29 AM
ejm Heads can be fitted to either side. If you need th... Mar 9 2008, 06:05 AM village idiot Thanks for your reply Ed!
How would I correct... Mar 9 2008, 11:01 AM brer did you check your deck height and compression?
i... Mar 9 2008, 11:40 AM village idiot Heads were just given a cleanup cut according to t... Mar 9 2008, 11:53 AM McMark There are a lot of checks you can do right now to ... Mar 9 2008, 12:04 PM
village idiot Right now i just want to get it back on the road. ... Mar 9 2008, 03:10 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 17th May 2024 - 02:23 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.