 Dizzy Install Question: What the heck happened?, Somehow the rotor got lined up to the #4 position |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| kpfoten |
 Oct 10 2008, 08:42 PM
Post
#1
|
|
Member  Group: Members Posts: 220 Joined: 15-April 08 From: Escanaba, MI Member No.: 8,927 Region Association: None  |
Hello,
I was installing my new SVDA dizzy tonight when I think something got screwed up... I had the 009 bumped to the #1 cyl position (notch on the dizzy), removed it, and put the new one in--I initially had some trouble getting the base to line up into the notch, but after I finally seated it, the rotor now seems to be pointing to the #4 position (directly towards the front of the car). I initially thought the notch was toward the #1 position (about 2 o'clock on the 009), and it seems I somehow moved it to the 12 o'clock position as I tried to install the new dizzy. I didn't think it was possible to do such a thing?? Is there something I'm missing? |
   |
 
|
Posts in this topic
kpfoten Dizzy Install Question: What the heck happened? Oct 10 2008, 08:42 PM
Kirmizi Where's the timing mark on the fan or flywheel... Oct 10 2008, 10:13 PM
kpfoten Hey Mike--
I was under the car and made sure the ... Oct 10 2008, 11:03 PM Vacca Rabite You are 180 degrees off.
Zach Oct 10 2008, 11:14 PM type11969 The dizzy is installed and seated properly? In oth... Oct 11 2008, 07:09 AM kpfoten Where is the rotor "supposed" to be poin... Oct 11 2008, 09:23 AM r_towle Stock motor, Stock dizzy the number one cylinder l... Oct 11 2008, 09:30 AM kpfoten Thanks--I'll check it out! One thing I kno... Oct 11 2008, 01:16 PM kpfoten Okay--here's what I found out:
The notch at t... Oct 11 2008, 01:58 PM r_towle
Okay--here's what I found out:
The notch at ... Oct 11 2008, 02:18 PM Joe Owensby Why don't you compare the location of the roto... Oct 11 2008, 03:32 PM kpfoten Joe--you know, that may be what's going on. I ... Oct 11 2008, 04:07 PM Racer Chris The line on the top edge of the distributor body i... Oct 11 2008, 04:23 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 17th May 2024 - 06:57 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.