 Another leakdown testing question |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| rtalich |
 Oct 16 2008, 03:22 PM
Post
#1
|
|
Member  Group: Members Posts: 279 Joined: 25-September 06 From: Bellevue, WA Member No.: 6,913 Region Association: None  |
Connecting air to the tool and setting the pressure so that the first gauge reads 100psi BEFORE connecting to the cylinder. When I do connect to the cylinder, the pressure drops a bit. Do I re-adjust back up to 100psi before taking my % reading?
Thanks, Rob |
   |
 
|
Posts in this topic
rtalich Another leakdown testing question Oct 16 2008, 03:22 PM
SLITS Adjust to 100 psi as specified ... connect to cyli... Oct 16 2008, 10:16 PM
rtalich
Adjust to 100 psi as specified ... connect to cyl... Oct 17 2008, 10:04 AM retrofit I am going to admit my technical ignorance here an... Oct 17 2008, 03:35 PM orange914
I am going to admit my technical ignorance here a... Oct 18 2008, 12:35 AM DNHunt A leakdown test tells you how much air is leaking ... Oct 17 2008, 06:06 PM HAM Inc Rob if you have the two gage style you do want to ... Oct 18 2008, 03:26 PM orange914
BTW the harbor freight gage is a POS!
that b... Oct 18 2008, 06:46 PM Vacca Rabite
BTW the harbor freight gage is a POS!
that ... Oct 18 2008, 07:23 PM Jake Raby Yes, maintaing 100 PSI working pressure makes thin... Oct 18 2008, 07:23 PM Jake Raby never skimp on diagnostic tools! Oct 18 2008, 08:09 PM swl Can you use the leak down test on a cold engine wi... Oct 19 2008, 07:18 AM rtalich
Rob if you have the two gage style you do want to... Oct 19 2008, 03:15 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 25th May 2024 - 06:18 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.