 Air Injection Hole, Rethread it? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| BiG bOgGs |
 Nov 8 2008, 12:14 PM
Post
#1
|
|
The Bogus One  Group: Members Posts: 452 Joined: 25-September 04 From: Ft. Myers, FL 33967 Member No.: 2,829 Region Association: South East States  |
Hi Guys, I am dealing with a De-Smogged 76 that has some stripped threads in the holes in the heads. Two of the plugged holes are fine, but the other two slowly back/slide out, one of them pretty quickly. I was just wondering if I could re thread the holes just slightly larger. Two worries I have are... 1) would the larger diameter cause any problems with other parts of the head, and 2) would the little metal shavings that would come off into the head cause any possible problems or would they just eventually get blown out the exhaust?
Thanks, Jim |
   |
 
|
Posts in this topic
BiG bOgGs Air Injection Hole Nov 8 2008, 12:14 PM
SLITS Coast the tap with thick axle grease ... it will c... Nov 8 2008, 01:55 PM Cap'n Krusty The refuse will all go out the exhaust as the hole... Nov 8 2008, 02:09 PM Wilhelm If you were going to put a plug in it you might co... Nov 8 2008, 02:34 PM BiG bOgGs Thanks for the reply's. I am considering usin... Nov 8 2008, 04:50 PM
EyeTrip Pipe thread cut with thick grease and valve closed... Nov 8 2008, 10:17 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 18th May 2024 - 02:23 PM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.