 Front BMW brakes locking front wheels all the time, why...please guys can i have your advice? |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| budman5201 |
 Nov 13 2008, 09:07 PM
Post
#41
|
|
Senior Member  Group: Members Posts: 595 Joined: 1-April 07 From: tempe, az Member No.: 7,635  |
I recently bought new rear calipers, redid the front BMW brakes up front and installed HAWK race pads up front. The braking has significantly improved! YES! but now i have one dilema......The front brakes lock up EASILY and the rears never at all..........I wish i could make all them lock up in emergency situations or at least more Braking in the rear.
Did i just significantly make the front brakes better by installing new race pads and BMW brakes? Can i adjust anything with the stock rear system to get more pressure to the back so i dont lock up the front VERY EASILY??? thanks guys i appreciate your help..... Stock 1.7 liter GOING SUBARU 2.5 200 hp N/A soon!! Trying to make everything else PERFECT before i get my third Subaru done.....The braking was lacking on my last conversion...... thanks! Attached image(s) 
|
   |
 
|
Posts in this topic
budman5201 Front BMW brakes locking front wheels all the time Nov 13 2008, 09:07 PM
Mike Gilbert i would try adjusting the rear brake proportional ... Nov 13 2008, 10:06 PM Eric_Shea Sorry Mike, the "remove the proportioning val... Nov 13 2008, 10:26 PM ConeDodger As much as anyone would hate to admit it :D , I h... Nov 13 2008, 10:38 PM markb :agree: Listen to Eric, he knows what he's tal... Nov 13 2008, 10:43 PM jaxdream Hi , I was wondering if any of you more experience... Nov 13 2008, 11:12 PM
budman5201 okay so....get hawk pads for the rear, then adjust... Nov 13 2008, 11:32 PM budman5201
okay so....get hawk pads for the rear, then adjus... Nov 13 2008, 11:57 PM Dr. Roger blue, black, or orange?
okay so....get hawk pa... Nov 14 2008, 01:06 AM Brett W Toss the stock rear calipers and put the stock fro... Nov 14 2008, 08:22 AM Cap'n Krusty
Toss the stock rear calipers and put the stock fr... Nov 14 2008, 09:43 AM Root_Werks This is some good reading. I need to go through m... Nov 14 2008, 09:43 AM Eric_Shea
Couple things in there I would call dumb... espe... Nov 14 2008, 10:24 AM Solo914
Couple things in there I would call dumb... esp... Nov 14 2008, 10:51 AM Eric_Shea
I want to clarify this comment.
The rear valve ... Nov 14 2008, 11:02 AM Eric_Shea Kyle,
Do you have a firm pedal issue? If so I wo... Nov 14 2008, 11:13 AM Solo914 Eric,
I would say that I have a firmer pedal than... Nov 14 2008, 11:27 AM davesprinkle
Kyle,
Do you have a firm pedal issue? If so I w... Nov 14 2008, 11:59 AM budman5201 OKay guys I will ring back into here next week whe... Nov 14 2008, 03:18 PM budman5201
OKay guys I will ring back into here next week wh... Nov 20 2008, 03:16 PM horizontally-opposed
Too many variables left out of the mix.
The foll... Nov 14 2008, 11:28 AM Eric_Shea Yup... that was me. :clown:
I knew someone was g... Nov 14 2008, 11:36 AM horizontally-opposed
I used to recommend it but that was before...
B... Nov 14 2008, 11:40 AM Eric_Shea
I just ordered one from Uncle Chris Foley. I li... Nov 14 2008, 11:39 AM Eric_Shea Go write something... :D Nov 14 2008, 11:43 AM Racer Chris The reason for matching your pads front to rear is... Nov 21 2008, 12:09 AM Dave_Darling Remember, though:
Brakes stop the wheels. Tires ... Nov 21 2008, 12:50 AM Eric_Shea
Except he has BMW calipers now with about 40% mo... Nov 21 2008, 10:49 AM ConeDodger
Except he has BMW calipers now with about 40% m... Nov 21 2008, 11:19 AM davesprinkle
... he has BMW calipers now with about 40% more ... Nov 22 2008, 01:23 PM Eric_Shea I don't know jack but... it sure is fun preten... Nov 21 2008, 02:18 PM ConeDodger
I don't know jack but... it sure is fun prete... Nov 21 2008, 02:26 PM Phoenix 914-6GT
I don't know jack but... it sure is fun prete... Nov 21 2008, 02:34 PM horizontally-opposed
I don't know jack but... it sure is fun pret... Nov 21 2008, 04:33 PM Dave_Darling
Never really thought about this before, but:
1. ... Nov 24 2008, 09:57 AM Eric_Shea
TIP: Sisters. (one mother-in-law)
Jon Von B. Y... Nov 21 2008, 02:50 PM ericread
TIP: Sisters. (one mother-in-law)
Jon Von B. ... Nov 24 2008, 08:47 AM Phoenix 914-6GT Not yet... getting it started though. Just got my ... Nov 21 2008, 02:59 PM budman5201 WOO HOO!!! The verdict is in! My ... Nov 22 2008, 02:19 PM Eric_Shea
Both but, I'd say the pad area is causing th... Nov 22 2008, 05:22 PM budman5201
Both but, I'd say the pad area is causing t... Nov 24 2008, 01:28 AM Phoenix 914-6GT I'm thinking of doing a Portofield group buy t... Nov 24 2008, 01:31 AM Eric_Shea
It would give you a firmer pedal feel. You now ... Nov 24 2008, 08:40 AM Eric_Shea Sorry Dave... #2 and #4 cancel each other out. Nov 24 2008, 10:48 AM westgl Hey Eric,
Let me say, I wish I would have read th... Nov 27 2008, 01:27 PM Phoenix 914-6GT Just because I don't know if Eric is checking ... Nov 27 2008, 01:41 PM westgl This is my setup,
My car is street car mainly but... Nov 27 2008, 06:24 PM yeahmag Does "Alan Johnson Porsche" have a site?... Nov 27 2008, 05:53 PM Eric_Shea Aaron,
Hope this works:
http://www.ajusa.com/bro... Nov 27 2008, 09:56 PM r_towle I am curious why the original poster has not chose... Nov 27 2008, 11:00 PM Eric_Shea
If anyone else has this problem try sourcing ear... Nov 28 2008, 01:25 PM budman5201
If anyone else has this problem try sourcing ea... Nov 28 2008, 01:53 PM Eric_Shea Yup... looks like the early 911 ones are hard to f... Nov 28 2008, 11:02 PM Dr Evil After conferring with Eric on this, I wanted to po... Dec 8 2008, 09:14 PM Eric_Shea If you don't mind... I'm going to try to f... Dec 8 2008, 09:23 PM Eric_Shea
Abso-friggen-lutely.
We all use to spout the wi... Dec 8 2008, 09:33 PM anderssj
Eric, thanks for posting this--it's importan... Dec 9 2008, 11:32 AM Joe Ricard I never heard of Porterfields identified by colors... Dec 9 2008, 06:22 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 20th May 2024 - 08:54 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.