FS or trade: 73 914/6 conversion Options

[jvirn]

Looking to sell or trade for a 911 or 912. Something with a back seat & already on the road. A driving project is OK.

- 73 body, 83SC 911 front suspension,
--5-bolt Fuchs, Konis front & back, 180lb springs in back.
-Trailing arms and rear pan reinforced for the conversion.
-Welded bulkhead engine mount.
- Peterson front mounted oil tank w/Setrab front mounted oil cooler
- Jwest shifter
- Welded Tangerine racing roll cage
- Battery moved to front
- 2.7 rebuilt engine, break-in time only. New clutch & resurfaced flywheel
- Weber carbs, PMO watershields & linkage
- 901 tranny
- Bursch headers, p-shooter exhaust
- New body/door seals not installed
- All parts to complete are with the car (top, rocker covers, engine lid, etc)

NEEDS:
- Paint job, surface rust on some body panels
- Interior needs to be cleaned up
- Roll bar not painted
- Shift rod installed
- Rear brake lines
- I'm sure there are a few other items that I'm forgetting, but it is close to being on the road.

Looking for $10K or 5K as a roller (tranny, exhaust & oil system will stay with the car).

email: jvirnoche AT hotmail.com