 Cooling "mister", ...oil cooler and heads |
|
|
|
Porsche, and the Porsche crest are registered trademarks of Dr. Ing. h.c. F. Porsche AG.
This site is not affiliated with Porsche in any way. Its only purpose is to provide an online forum for car enthusiasts. All other trademarks are property of their respective owners. |
|
|
| yeahmag |
 Jun 23 2009, 04:08 PM
Post
#21
|
|
Advanced Member  Group: Members Posts: 2,422 Joined: 18-April 05 From: Pasadena, CA Member No.: 3,946 Region Association: Southern California 
 |
I've been thinking about this for a long time and only found one partial thread on it. It seems to me that an "intercooler style" mister could be very beneficial on the track to help control oil and head temps.
While I had no head temp issues at Willow, my oil temps did rise to the point I pulled off. I was thinking a simple mister introducing water mist in to the fan or directly above the oil cooler could be a trick way to deal with temp spikes. Anybody done this before? -Aaron |
   |
 
|
Posts in this topic
yeahmag Cooling "mister" Jun 23 2009, 04:08 PM
yeahmag Looks like a lot of fun could be had here:
http://... Jun 23 2009, 04:46 PM r_towle Use a few cold start injectors and a seperate pump... Jun 23 2009, 04:47 PM yeahmag Any idea what if anything other than tap water I... Jun 23 2009, 04:52 PM BarberDave :trophy:
Neet idea; think about spraying alcoho... Jun 23 2009, 04:55 PM yeahmag I'm just goofing around right now. The idea ha... Jun 23 2009, 05:01 PM john rogers About the only way to cool the engine reliably is ... Jun 23 2009, 05:14 PM r_towle tap water...wont hurt anything...might clog the in... Jun 23 2009, 05:18 PM mikez Go with a bypass and another oil cooler or two. T... Jun 23 2009, 05:19 PM SLITS There was a thread here or maybe the "other s... Jun 23 2009, 05:30 PM yeahmag I have a Setrab and a spin on adapter waiting to g... Jun 23 2009, 05:31 PM mikez If you don't care about looks.....Your local T... Jun 23 2009, 05:34 PM
Derek Seymour You could use co2, it's cheap, light, cold, an... Jun 23 2009, 06:00 PM porschecb Just run dry ice through copper tubing it works gr... Jun 23 2009, 05:47 PM SLITS
Just run dry ice through copper tubing it works g... Jun 23 2009, 06:03 PM Derek Seymour This is what's being used to cool intercoolers... Jun 23 2009, 06:14 PM ConeDodger A few years back water injection into the intake c... Jun 23 2009, 05:58 PM porschecb Equal spaced small vent holes. Jun 23 2009, 06:50 PM jmill Coil up some copper tubing inside an ice chest fil... Jun 23 2009, 07:49 PM jhadler Apart from the misting being a pretty ineffective ... Jun 24 2009, 02:27 PM tat2dphreak fuck it, put the misters in the cab, like a porch ... Jun 24 2009, 02:50 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 29th May 2024 - 03:25 AM |
Invision Power Board
v9.1.4 © 2024 IPS, Inc.