barada
Oct 24 2009, 06:10 PM
Hello,
Testing the waters to see if anyone has a 150-180 hp engine they are wanting to sell. I like driving the 914 but I want some more power to satisfy my hour commute. Scared of the price tag on the super hopped up TYPE IV's but was hoping someone had a backup engine lying around.
Email me at
phillipkj4athotmail.com
replace the at with @ got a nasty virus from spam so I don't post it anymore.
Thanks
Phillip
RJMII
Oct 24 2009, 07:06 PM
I'd lower the boost on my V6 and sell it to you. =o) I'd even make a few adjustments to it so you could keep your rear trunk. That should be about 180hp.
I'm guessing you want to stay aircooled though.
number6
Oct 24 2009, 08:21 PM
What sort of price range are you shopping for?
barada
Oct 24 2009, 09:23 PM
QUOTE(number6 @ Oct 24 2009, 10:21 PM)
What sort of price range are you shopping for?
3-5k
tat2dphreak
Oct 24 2009, 09:29 PM
in that range I'd get a raby kit or mcmark's 5k 120hp engine.
unless you want to do a subaru conversion, which I dunno if that can be done for 5k, either... I'm pretty sure you can't do a 6 conversion for that, either...
pete-stevers
Oct 24 2009, 09:41 PM
the older higher milage 3.0 sixes are 3-4000..180-200hp
while you might find a 3.2 for 5000 ...200+hp
mostly find them on pelicanparts.com
and plus conversion costs
But the simplicity of popping in a 2056 is awfully enticing
barada
Oct 24 2009, 09:46 PM
QUOTE(pete-stevers @ Oct 24 2009, 11:41 PM)
the older higher milage 3.0 sixes are 3-4000..180-200hp
while you might find a 3.2 for 5000 ...200+hp
mostly find them on pelicanparts.com
and plus conversion costs
But the simplicity of popping in a 2056 is awfully enticing
Thanks.
I have a 3.0 with 80K on it I can buy local for 3000. I have 2 911's with 3.0 so I am very familiar with that engine.I just don't have any of the conversion parts. I missed a 2056 a while back for 5k with a car attatched so I was hoping something like that would be available.
pete-stevers
Oct 24 2009, 11:20 PM
things you will need
engine mount- rich johnson
engine tin
clutch, pressure plate KEP
modified shift rod
oil tank 800-900 for stock
oil lines
oil cooler
thermostat
fuel pump
........
things to think of
up graded front brakes 911stuff
bigger wheels
re enforced ears
chassis re-enforcing
it might make sense to look in the classifieds for one already built
there is a very nice one with a 3.2 in it
i doubt you could build yours or it for the asking price
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.