Cire
Nov 3 2009, 08:31 AM
I was thinking about pulling the glass out, cutting out the center of the door and putting a thin sheet of alum over it. HOWEVER, the doors are in great shape. Cranks work, little to no rust and pretty much dent free. Anyway, I hate breaking good doors if there is a better way to get it done. = )
Cut em?
Eric
Click to view attachmentClick to view attachmentClick to view attachment
jasons
Nov 3 2009, 09:16 AM
What are you trying to accomplish? If you just want Al door panels, you don't need to cut the door out for that. If this is a street car, I would keep the doors intact.
HeloMech
Nov 3 2009, 01:24 PM
get a set of earlier doors. they won't have that heavy horizontal bracing inside the door. one would assume it's the weight issue you're tying to work on.
SirAndy
Nov 3 2009, 01:29 PM
QUOTE(jasons @ Nov 3 2009, 07:16 AM)
What are you trying to accomplish?
campbellcj
Nov 3 2009, 10:17 PM
You may want to check out this thread - esp see Brant's pic of a gutted early-style door
http://www.914world.com/bbs2/index.php?showtopic=97982