QUOTE(bcheney @ Dec 8 2009, 02:50 PM)
Rich sells his six conversion engine mounts on ebay regulary and is lists other items in the vendor section of this site. A terrific guy who supports anyone with a passion for our cars. I'm sure he would be willing to converse with you about this topic if he was in fact the person who did the mod to set of trailing arms in the past. His contact info is listed in the vendor section.
Rich Johnson
1923 Prescott Road
Allen, Texas 75002
(972) 398-9146
a914guy@aol.com
Thanks, bcheney, I did just that. Sent an email to Rich and got an immediate and very informative response. The short story is, yes, he had the bearing housing moved toward the trailing arm by 19mm. As you can imagine, this was an involved fab effort.
He did this so that he could run 205s on 7" Fuchs under unmolested fenders. He thinks the results were successful, but says it was largely an aesthetic improvement, since 205s fit on 6" Fuchs without requiring the trailing arm mod.