pbanders
Feb 25 2010, 12:04 PM
I have 380 cc/min (@2.0 Bar ~ 29.4 psig) from data I got from Roland Kunz some time ago. Does anyone have recent data, perhaps when getting your injectors cleaned and flow tested? I'm looking for data on the 019's, but if you have data on the 038's, that would be useful, too.
(edited to add testing pressure)
kconway
Feb 25 2010, 12:18 PM
I had a set of 019 injectors done by WitchHunter somewhat recently and the rates were as follows:
Static flow
102 - 101.5 - 102.5 - 102
Pulsed flow @ 2500RPM
95.5 - 94.5 - 95 - 94.5
cc/min@43.5 psi
408 - 406 - 410 - 408
McMark
Feb 25 2010, 01:07 PM
Testing pressure will change the numbers, so make sure you're comparing apples to apples.