Help - Search - Members - Calendar
Full Version: Going to need a 4 wheel alignment in Seattle..
914World.com > The 914 Forums > 914World Garage
jeremiah98125
Wondering if any folks local to Seattle could recommend a shop to do a 4 wheel alignment? I was reading a thread about some guy named Tim Kornacki, if he's still around how would I find him? Also, how much $$ does this usually run?
Todd Enlund
Some of the Seattle guys know Tim. I'm sure that when they see this, they can give you advice. Until then... icon_bump.gif
KELTY360
icon_bump.gif

I'm interested also. A couple years ago I was told about a place called G2 Motorsports in the Fisherman's Wharf area, but can't find a listing for them.

Anyone?
Root_Werks
You might try :

http://www.eurotechbodywerkes.com/

It will be a couple of bucks, but probably worth every penny.

If they don't do alignments, I bet they have a local shop that does all thiers.
KELTY360
QUOTE(Root_Werks @ Mar 22 2010, 12:31 PM) *

You might try :

http://www.eurotechbodywerkes.com/

It will be a couple of bucks, but probably worth every penny.

If they don't do alignments, I bet they have a local shop that does all thiers.


Thanks Dan. They don't do alignments but recommended 2 shops they use:

Cantrell Motorsports (425) 820-0231, and

Omni (425) 823-1511 I talked to Pat @ Omni, he said about $150; nice guy

aircooledtechguy
I had my car done @ Cantrell Motorsports in Kirkland. They did a great job on my 4-wheel alignment. I was out the door for around $220 and that included the shims to adjust the rear. Good bunch of folks. I only wish I had also done the turbo tie rod upgrade before bringing the car to them. I'll need to go back when I do it in the future so I've been holding off on the upgrade. . .
PeeGreen 914
You guys would be crazy to take it to anyone other than Tim. He does great work and is very reasonable. I can't say for sure but I believe he charges 150 for an allignment and corner ballance. You can reach him during work hours at Matt's Greenwood Autocare. 206-789-1850.
6freak
Another plug for Tim ...Great guy and a 914 owner himself that should be reason enuf right there...He just did mine about two weeks ago
Bleyseng
I had mine done this fall at Tru-line http://www.trulineseattle.com/ for about $200. They have all the shims too for the rear.
Car drives fantastic now at high speeds...plus the new tires help.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2024 Invision Power Services, Inc.