From a DPD A/C equipped 914.


~Face board is in excellent condition. No cracks or fading.

~3 rubber gauge rings in good condition.

~Quartz clock is all original, not a reproduction, and not filled with non-original movement. I disassembled, cleaned, inspected, and lubricated the clock mechanism. It keeps excellent time and is nearly silent. Hands are faded and lens needs to be polished.

~Temp gauge tested good and lens could use polishing.

~Volt gauge tested good and lens could use polishing.

~Center console side boards need to be rebuilt.

~Base board, shifter boot, vinyl, and switch are all rough and faded.

~Plastic tray is in okay condition, not cracked. Arm rest pad, which fits into and on top of the center tray, could be rebuilt. Very rough.


New gauges from AA total about $700.00. DPD Center console face varies $100-$300+.


Asking $350 for everything.



Testing clock after servicing below. Keeps fantastic time. Comes with factory wiring.

pieces included.

When installed with the A/C unit, looks like this.

Did I mention, "or best offer"?

Or best offer !!


What does a guy have to do to get his center console sold here?