Everything hooked up, I get the 3-wipes when the squirter is actuated, but no delay action when the wiper arm is moved "down".

It could be a bad relay?

I did:

Red/blk on the motor

blue to green (Switch to relay)

Grn from relay to motor (From the removed green now hooked to blue on relay)

Brn to ground on motor

Brown from switch to relay (this works fine).

Did I miss something?

Turn key on.
Put wiper lever into delay position.
Check all the wires going to the relay for 12vdc.

Rich

Did you break-off the tab that allows the selector into the delay position ? You end up with: Off, Low, Fast, and Delay

Yup, broke off the tab.

Hmm, Rich brings up an interesting point. I didn't really fiddle with things all that much. I did get power to the red/blk wire up to the relay, but didn't think to check the new blue wire.

I should also check ground, should be good, but you never know.