Rotary'14
Aug 15 2010, 11:49 PM
I've made this set, it's 9.5 mm SS .028 tubing, and 8mm SS .028. The ends have beads to keep the fuel lines from blowing off. I've bent it and test fitted the prototypes upon my car. They fit very well IMHO.
Engine Compartment $25 each + $15 shipping
Engine Compartment set (2 lines) $45 + $15 shipping
Tunnel fuel line each $40 + $25 shipping
Tunnel fuel line (set of 2)$75 + $35 shipping
If ordering a complete set shipping will be $40 in continental US.
complete your installation with the following,,,
Fuel tank fuel sock $10
Fuel tank sealing ring NLA for now
Firewall grommets $2.00 each
Engine shelf grommets $4.00 each
FI hose clamps $2.00 each or $1.75 each(if you order more than 10)
Shipping included if you buy a set of lines.
Thanks for looking!
Rotary'14
Aug 18 2010, 09:00 AM
Here are a couple of pics of how the lines look once installed.
Rotary'14
Aug 18 2010, 11:24 PM
I put together an install video,,,
http://www.youtube.com/watch?v=hxFRQTWLetwThere is a still image where I show a drill, WD-40 and the stock grommet. You only need this if you are using a 9.5mm return line.
Rotary'14
Aug 31 2010, 06:58 PM
I can also supply lines in 8mm now too! Now I can say my set is a direct replacement for the stock sizes.
Same great price.
-Robert
Kalva
Sep 3 2010, 12:39 PM
Recieved my set they look great!!!
Thanks
let me know when you'll be in my area. rosemead.
Rotary'14
Sep 3 2010, 07:49 PM
QUOTE(VOX @ Sep 3 2010, 03:48 PM)
let me know when you'll be in my area. rosemead.
I can deliver to people local to Los Angeles. Hell I can deliver to peeps on my way home from work,,, that includes, Camarillo, Simi Valley, Northridge, SF valley, Burbank, Glendale,,,, you get the idea. Drop me a PM and we can set something up.
-Robert
Rotary'14
Sep 3 2010, 07:58 PM
QUOTE(Kalva @ Sep 3 2010, 11:39 AM)
Recieved my set they look great!!!
Thanks
I am glad you like them.
-Robert
0396
Sep 3 2010, 10:57 PM
looks like real clean work.. will keep you in mind if I need a set.
Britain Smith
Sep 3 2010, 11:17 PM
Any chance you can make a set with AN fittings welded on the ends? I will need a set of AN-8 supply and AN-6 return.
-Britain
jjbunn
Sep 4 2010, 10:19 AM
Does the engine need to be out to fit these?
Rotary'14
Sep 4 2010, 01:13 PM
QUOTE(jjbunn @ Sep 4 2010, 09:19 AM)
Does the engine need to be out to fit these?
The engine can be in the car to install these. The most you might have to do is support the engine with a jack, and pull the engine mount back a little on the right side for some clearance.
I will work on an install video with the engine in the car next time.
-Robert
Rotary'14
Sep 11 2010, 09:05 AM
RRC weekend bump! Wish I was there,,,,,
c12croft
Sep 11 2010, 05:09 PM
Robert,
"I will work on an install video with the engine in the car next time".
This would be well received.
How about you maybe stop by NY on your way home one night?
Rotary'14
Sep 11 2010, 06:09 PM
QUOTE(c12croft @ Sep 11 2010, 04:09 PM)
Robert,
"I will work on an install video with the engine in the car next time".
This would be well received.
How about you maybe stop by NY on your way home one night?
No problem,,, next time I decide to take the long way home.
-Robert
Britain Smith
Sep 11 2010, 09:21 PM
QUOTE(Britain Smith @ Sep 3 2010, 10:17 PM)
Any chance you can make a set with AN fittings welded on the ends? I will need a set of AN-8 supply and AN-6 return.
-Britain
Never heard back from you regarding this...can you do it?
-Britain
Rotary'14
Sep 12 2010, 03:01 PM
QUOTE(Britain Smith @ Sep 11 2010, 08:21 PM)
QUOTE(Britain Smith @ Sep 3 2010, 10:17 PM)
Any chance you can make a set with AN fittings welded on the ends? I will need a set of AN-8 supply and AN-6 return.
-Britain
Never heard back from you regarding this...can you do it?
-Britain
Hey Britain,, Sorry, I cannot do this mod at this time. Point me in the direction of some economical SS AN fittings, and maybe I can make you a one off set. I do have access to some really nice welders at work.
-Robert
bandjoey
Sep 17 2010, 09:45 PM
Do you have a way to ship these? Thanks Bill
Rotary'14
Sep 17 2010, 11:59 PM
QUOTE(bandjoey @ Sep 17 2010, 08:45 PM)
Do you have a way to ship these? Thanks Bill
Yes I can ship these in a large flat 60"x20" cardboard package that ships USPS priority mail. Should arrive 3 days after shipping.
$35 each + $14 shipping
$60 set of 2 + $16 shipping
-Robert
sixnotfour
Sep 18 2010, 08:53 AM
QUOTE(Britain Smith @ Sep 11 2010, 08:21 PM)
QUOTE(Britain Smith @ Sep 3 2010, 10:17 PM)
Any chance you can make a set with AN fittings welded on the ends? I will need a set of AN-8 supply and AN-6 return.
-Britain
Never heard back from you regarding this...can you do it?
-Britain
Racer Chris sells a subi conversion set
Rotary'14
Sep 23 2010, 11:40 AM
aircooledtechguy
Sep 23 2010, 06:21 PM
Just wanted to thank you for the great product and your honesty on the shipping by refunding me the extra. If I need more lines, I'll hit you up for sure. Thanks again!!
BTW, I used my 914 to go to the post office to pick-up the package not thinking. . . It *JUST* fit!!
two-strokejohn
Oct 3 2010, 06:38 PM
I'd like to get a set of these fuel lines shipped to Ohio. I've tried to email you without success. can you contact me or give me contact info please
thanks, John
Rotary'14
Oct 3 2010, 07:31 PM
QUOTE(two-strokejohn @ Oct 3 2010, 05:38 PM)
I'd like to get a set of these fuel lines shipped to Ohio. I've tried to email you without success. can you contact me or give me contact info please
thanks, John
Doh! I should check that email more. You can get a much faster response from me thru PM.
-Robert
Montreal914
Oct 3 2010, 11:59 PM
Hi Robert,
Do you make the two short lines in the engine compartment?
Thanks,
Eric
Rotary'14
Oct 4 2010, 01:31 PM
QUOTE(Montreal914 @ Oct 3 2010, 10:59 PM)
Hi Robert,
Do you make the two short lines in the engine compartment?
Thanks,
Eric
Funny you should ask,, they are in the works and should be available soon.
-Robert
Strudelwagon
Oct 4 2010, 02:04 PM
QUOTE(Rotary'14 @ Aug 15 2010, 10:49 PM)
I've made this set, it's 9.5 mm SS .028 tubing, and 8mm SS .028. The ends have beads to keep the fuel lines from blowing off. I've bent it and test fitted the prototypes upon my car. They fit very well IMHO.
$35 each + $14 shipping
$60 set of 2 + $16 shipping
Thanks for looking!
Any idea what shipping would be for the set of 2 to Penticton ,BC,Canada V2A 3K3?
Thanks
PanelBilly
Oct 5 2010, 01:17 PM
I'm waiting for the short one and then I'll order all four at the same time. Send me a PM when they're done.
Rotary'14
Oct 5 2010, 06:53 PM
QUOTE(Strudelwagon @ Oct 4 2010, 01:04 PM)
QUOTE(Rotary'14 @ Aug 15 2010, 10:49 PM)
I've made this set, it's 9.5 mm SS .028 tubing, and 8mm SS .028. The ends have beads to keep the fuel lines from blowing off. I've bent it and test fitted the prototypes upon my car. They fit very well IMHO.
$35 each + $14 shipping
$60 set of 2 + $16 shipping
Thanks for looking!
Any idea what shipping would be for the set of 2 to Penticton ,BC,Canada V2A 3K3?
Thanks
Shipping for a set of lines up to Canada runs $26 via USPS priority mail. I'll be checking UPS, but I hear they are more.
-Robert
Montreal914
Oct 5 2010, 10:39 PM
QUOTE(Rotary'14 @ Oct 4 2010, 12:31 PM)
QUOTE(Montreal914 @ Oct 3 2010, 10:59 PM)
Hi Robert,
Do you make the two short lines in the engine compartment?
Thanks,
Eric
Funny you should ask,, they are in the works and should be available soon.
-Robert
Please PM me when you have them, thanks.
Al Meredith
Oct 6 2010, 07:03 PM
Mine came today , even though the box said all over it "do not bend and fragile, the box was bent . I'm taking it to the post office tomorrow and let them open it. I'll advise. AL
Rotary'14
Oct 13 2010, 09:35 PM
I am happy to report that Al Meridith got it worked out with the USPS.
In other news look what I figured out how to make!
Engine compartment fuel lines will cost $
3540 for a set of 2. I am pretty sure I can ship these for about $7 in the USA.
-Robert
wreglesworth
Oct 22 2010, 12:57 AM
QUOTE(Rotary'14 @ Oct 13 2010, 08:35 PM)
I am happy to report that Al Meridith got it worked out with the USPS.
In other news look what I figured out how to make!
Engine compartment fuel lines will cost $35 for a set of 2. I am pretty sure I can ship these for about $10 in the USA.
-Robert
I would like a full set please (2 long 2 short)
What would it be to ship them to me in Vancouver Canada
(cheapest possible no rush)
Post code V0N 2E0
THanks!
Jonathan
Rotary'14
Oct 22 2010, 03:16 PM
QUOTE(wreglesworth @ Oct 21 2010, 11:57 PM)
QUOTE(Rotary'14 @ Oct 13 2010, 08:35 PM)
I am happy to report that Al Meridith got it worked out with the USPS.
In other news look what I figured out how to make!
Engine compartment fuel lines will cost $35 for a set of 2. I am pretty sure I can ship these for about $10 in the USA.
-Robert
I would like a full set please (2 long 2 short)
What would it be to ship them to me in Vancouver Canada
(cheapest possible no rush)
Post code V0N 2E0
THanks!
Jonathan
Working on this,, will post details next week.
-Robert
Rotary'14
Nov 2 2010, 01:36 PM
QUOTE(wreglesworth @ Oct 21 2010, 11:57 PM)
QUOTE(Rotary'14 @ Oct 13 2010, 08:35 PM)
I am happy to report that Al Meridith got it worked out with the USPS.
In other news look what I figured out how to make!
Engine compartment fuel lines will cost $35 for a set of 2. I am pretty sure I can ship these for about $10 in the USA.
-Robert
I would like a full set please (2 long 2 short)
What would it be to ship them to me in Vancouver Canada
(cheapest possible no rush)
Post code V0N 2E0
THanks!
Jonathan
Bad news for my potential Canadian customers,, Fed Ex/DHL wants $75 (ouch!) and UPS ground is $50. USPS keeps quoting me different prices, or will not do it.
Big Sorry for Canadians. BTW it's a 58"x14"x1.5" package.
Now for some good news, things I offer fuel related. I am happy to report I offer the following;
Fuel tank fuel sock $10
Fuel tank sealing ring $.50 each
Firewall grommets $2.00 each
Engine shelf grommets $4.00 each
FI hose clamps $1.75 each or $1.50 each(if you order more than 10)
Shipping included if you buy a set of lines!
-Robert
dwillouby
Nov 4 2010, 06:26 AM
Can you do the tunnel lines in 3/8 inch?
I have a V8 conversion with fuel injection
Thanks
David
Rotary'14
Nov 4 2010, 06:37 AM
QUOTE(dwillouby @ Nov 4 2010, 05:26 AM)
Can you do the tunnel lines in 3/8 inch?
I have a V8 conversion with fuel injection
Thanks
David
I can do the whole set, tunnel and engine compartment lines, in 3/8. Custom requests are welcome.
-Robert
Rotary'14
Mar 4 2011, 09:21 AM
new month bump
76-914
Mar 21 2011, 03:06 PM
I wanted to give Robert a bump for us west coasters. I just installed his set last week. Very quick and easy install. Took 20 min's. I already had the engine and gas tank removed. Good quality and quick shipping.
Series9
Apr 14 2011, 02:45 PM
I would like to buy a set for the tunnel. I sent an email, but no reply.
Rotary'14
Apr 14 2011, 05:57 PM
QUOTE(Series9 @ Apr 14 2011, 01:45 PM)
I would like to buy a set for the tunnel. I sent an email, but no reply.
Hi Joe,,
Sorry for not checking my E-mail,, the easiest way to get a hold of me is to drop me a PM via the world site. I have tunnel lines in stock and ready to go,, what size do you need? 70~74 9.5mm and 8mm or 75~76 two 8mm lines.
-Robert
DB914
Jul 2 2011, 07:22 AM
Hi Robert,
I would like a complete set of ss fuel lines for my 73 2.0
Dave
turnaround89
Sep 1 2011, 02:33 PM
Just wanted to say thanks for such a great product. The fuel lines took less than an hour to install and the fuel lines were immaculate. If i ever build another 914, i will buy another set from you. Thanks so much!!!!
Rotary'14
Apr 20 2012, 02:42 PM
I haven't bumped this in a long time bump,,,,,,
earthcloud
May 24 2012, 01:13 AM
QUOTE(Rotary'14 @ Apr 20 2012, 01:42 PM)
I haven't bumped this in a long time bump,,,,,,
Timely bump. I have a 75 and planing to rid the plastic lines...what do you have? $? Thanks Charles
914six
Jul 21 2012, 11:49 AM
hey .. got some SS fuel lines thru the tunnel from Robert..
great guy and products.
mittelmotor
Jul 30 2012, 09:38 PM
Hi Robert,
Got the lines and they look great! Over the long, straight sections of the line, they're bent slightly. Is this intentional for an easy install, or did it just happen in shipping? No big deal to bend them back, but I thought I'd check.
Thanks!
--Doug
Jesco Reient
Aug 1 2012, 12:25 PM
Are these still available?
Rotary'14
Aug 3 2012, 09:34 PM
QUOTE(mittelmotor @ Jul 30 2012, 08:38 PM)
Hi Robert,
Got the lines and they look great! Over the long, straight sections of the line, they're bent slightly. Is this intentional for an easy install, or did it just happen in shipping? No big deal to bend them back, but I thought I'd check.
Thanks!
--Doug
Hi Doug, the slight bend is intentional,, that's why the box is not flat.
yes these lines are still available,, check first post for pricing.
-Robert
mittelmotor
Aug 6 2012, 02:29 PM
QUOTE(Rotary'14 @ Aug 3 2012, 08:34 PM)
QUOTE(mittelmotor @ Jul 30 2012, 08:38 PM)
Hi Robert,
Got the lines and they look great! Over the long, straight sections of the line, they're bent slightly. Is this intentional for an easy install, or did it just happen in shipping? No big deal to bend them back, but I thought I'd check.
Thanks!
--Doug
Hi Doug, the slight bend is intentional,, that's why the box is not flat.
yes these lines are still available,, check first post for pricing.
-Robert
Thanks! I appreciate the reply.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.