tscrihfield
Sep 8 2010, 09:14 AM
Okay this is my first post so I hope that I am doing this correct.
I have an original pair of 1970 914-6 spindles. The car they came off of was an 11,000 mile car that I had converted to a GT clone for a customer and they are in great shape. I have started taking them to bare steel and priming them though. The issue I am facing is that I am converting my car to 5 lug and I have tons of SC calipers and do not have any "M" style calipers. So before I cut the caliper tabs off and weld wider ones on would anyone like an original pair of these? I am willing to sell to try to buy another set that is okay but I know that these are worth something to someone with an original 6 car and would like the authenticity of it.
Thanks,
Thomas
carr914
Sep 8 2010, 09:26 AM
If you have Tons of SC Calipers and want to part with any, PM me
T.C.
I have a set of Boges, they are stripped to bear metal
Click to view attachmentClick to view attachment
tscrihfield
Sep 8 2010, 09:35 AM
QUOTE(gms @ Sep 8 2010, 10:29 AM)
I have a set of Boges, they are stripped to bear metal
I sent you a PM
tscrihfield
Sep 8 2010, 09:37 AM
QUOTE(carr914 @ Sep 8 2010, 10:26 AM)
If you have Tons of SC Calipers and want to part with any, PM me
T.C.
Thanks for the welcome! and I sent you a PM as well..
here is the left and right shock tower spindles, i cleaned the grease off them
Do you have pictures of your struts?
Click to view attachmentClick to view attachment
tscrihfield
Sep 8 2010, 08:40 PM
These are photos that I took earlier today. Let me know if you need anything else as far as photos go. The only difference from this strut to the other side is that this one was soda blasted and primed.
Thanks,
Thomas