I have a project on the go with lots of spare parts from 2 donor cars.

Rear glass (defrost & regular) ($50 & $25)
Head light motors ($20)
Front bumper with rubber bumpers (3 of 4 studs broken in rubber tits)
Bumper pads (various)
Front valence (fiberglass) ($90)
Door handles without tumblers (all SOLD)
Shifter linkage ($40)
Exhaust parts (various)
Muffler 1.7l ($150)
Rough leather backing
Chrome trim (various)
Steering wheel ($50)
Rotors ($20
Calipers ($30)
One trailing arm (driver side, $30)
Front steering/suspension parts (various)
Passenger tail light, lens chipped around edges ($40)
Bulbs
Windshield washer containers ($12)
Nice rear chrome bumper (pending sale)
Ring set (1.7)
Turn assemblies with ignition (no key, $50)
Signal covers ($20)
Wiper motors assemblies ($40)
Heating parts (various)
Stock rear sway bar (SOLD)
Rear axles ($20)
Original battery tray- no rust, just needs paint ($75)
Shifter ($30)
Console (SOLD)

BUMPERS SOLD

4 ATS rims with caps $225
With or without roller tires.

More parts on request
OBO.
I am located in Brockville, Ontario (K6V5T3)
I will ship in North America no problem and will consider worldwide.

Buyer pays all shipping and Paypal fees. I will not ship bumpers, exhaust or rims but would drive within 200km to deliver or meet someone.

Just PM me and I will respond quickly with pictures and a price.

Pictures available. (Parts aren't at my place but close so I can have a picture in 24 hours max)

Thanks,

Clow
Click to view attachment
Click to view attachmentClick to view attachmentClick to view attachment

Click to view attachment Click to view attachment

Any Consoles or console parts ? Let me know ! Dave

Anything left of the chassis? Such as engine mount brackets and outer suspension consoles ( l and r) ? Also, can u plz post a pic if the rear bumper ? I'm in Cambridge, ont so I could pick them up. Cheers

Do you have any door handles with the key? An early /4 ignition with the key would be a bonus (with the door handles). Thanks.

Damn, looks like I am going to be busy matching keys, I have a whole box full. Let me look tomorrow and I will post pictures/my results.

Yes I believe I have a console, pictures will be posted tomorrow afternoon.Click to view attachment Click to view attachmentClick to view attachmentClick to view attachment

Click to view attachment Click to view attachmentClick to view attachmentClick to view attachment

Click to view attachment Click to view attachment

Click to view attachment Click to view attachmentClick to view attachment

Prices??

Thanks for the reminder, I meant to do that last week. I posted most prices, its a start. Anything else just PM.

Things have quieted down around here and parts are sorted a little better. I am back to selling! Will combine items and am open to reasonable offers.

Thanks,

Clow

How about any sheet metal? I'm looking for a good cowl section especially the outer edges by the fender seam on both sides.

Not much sheet metal. I have both rear sail panels and the roll bar piece. In fair condition. Sorry its all I got.

I am interested in the console side parts. How much with shipping to 28086

Sorry, they sold early.

how much for a decent set of bumper pads (f/r) shipped to 92064?

Would you have a side shift tranny boot for me? Thanks, SD

I need 2 exterior door handles. How much shipped to 92596 (socal)

I have a

Driver - bolt striped*
Driver - bolt cut*
Passenger - nice

Outer finish 7/10 for all


$15 shipping across Canada or US.

The bolt can be replaced, see what I mean below.







I mentioned to a few others I would have some more pictures tonight. I got tied up at the school and its late so it will be delayed until tomorrow, sorry.


Thanks,

Clow

PM sent. Thanks.

This is an old ad but wondering if you still have a set of the fog light grills? If so, how much? I'm in Fresno, CA 73720.

keith

Got any more rear sway bar setups like this one?

Thanks.

Eric

Looking for f/r bumpers and front sway bar. still got them? If so please e-mail more detailed pics and prices with shipping to 91941 in cali, Thanks

On the calipers: fronts, rears, years?? Sorry if I missed it, but didn't see it. Thanks

Interested in the axles would go for 2 sets if you have them.
Thanks
Ian

I'd like that blue rear caliper. (Late Driver's side.)

front and rear sway bars wntd, and r the shift rods for early/rear/tail or late/side shift, I need late/side

Sway bars are all sold.
I have to double check calipers today.

The shift rods are late models.

Do you have any sheet metal? Thanks, Mike.

do you have a 3 port fuel pump?

I have no more sheet metal.

Yes, I have a rough looking pump. I can test it over the weekend to see what its like.

Clow

thanks let me know

I'm looking for a taco plate that you can put an oil temp sensor into it. Do you have one? Thanks in advance. Rich

I have none left, sorry. I am getting low on my collection....for now.


Clow

I asked some time ago but no answer, if you still have the fog light grills, how much? Also do you have a throttle position sensor/throttle body for a 1.7 1970, and if so, how much. My zip in CA is 93720

Thanks,

Keith

Do you have any aluminum threshold trim pieces? I want to replace my black plastic ones!

Hi,I am looking for a front passenger side bumper tit , a rubber bumper top and a front hood for my 1974 914.Please send reply to Perry Bruneau,(204) 896 3175 or PSBruneau@mts.net. I am located in Winnipeg,Manitoba. Thanks.

Sorry for the delay, I just sent you a message.

Clow

Nope, I have no threshold pieces at all.


Maybe you wanted used but here is a VendorNew aluminum

Do you have any 2 into 1 exhaust manifolds?