Used cross drilled brakes from a '73 914, asking $150 OBO plus shipping.
I removed these from the car I bought a few months ago due to the noise. Mine is a street car so don't really need the cooling aspect and I was tired of hearing ZZZZZzzzzzz when I stop. I marked all rotors and pads so you can reuse as is. One thing I notice is that the rear rotors had been turned and are under spec. I measure 0.325 and Pelican lists 0.351 as minimum so use at your own risk. The bearings for the front are included and I measure the front rotors at 0.424 which is still within spec. The pads all have about 1/16th inch of wear. New pads are 3/8th and these all measure around 5/16ths. If you don't want the rears due to the rotor thickness I can toss them and no need to pay shipping for them but my asking price is the same.
Click to view attachment