carr914
Apr 11 2011, 05:48 PM
This will go on for a Few Months as I uncover things (& duplicates) for my GT, so I will keep it Updated as things sell
1. A NOS 914-6 PORSCHE VW Rear Emblem - Never Installed, Planned this for my car, but it won't fit with my Rubber Hold Straps - $225 + Ship
Click to view attachment2. One Pair BBS Mahle 15x9 Wheels (w/Center Cap) Straight & True, 1 has a little Gold Overspray from PO paint job (easy clean-up) SOLD
2. 914-6 3Piece Oil Line Set - EVEN LOWER PRICE - $260 + Shipping
Click to view attachment3. RX7 Cooler - EVEN LOWER PRICE $50 + Ship
Click to view attachment
carr914
Apr 11 2011, 05:54 PM
A. 911 SC Front Calipers redone by the Master - Eric Shea @ PMB - SOLD
B. A Behr 911 Oil Cooler converted to work on a 914-6 - $125 & Ship
Click to view attachmentClick to view attachmentC. 914-4 - $30 & Ship
Click to view attachmentD. Bilstein Front Inserts - SOLD
Skid
Apr 11 2011, 07:50 PM
PM Sent.
turnaround89
Apr 11 2011, 10:10 PM
is the -4- relay board functional? if so, i may take it
carr914
Apr 12 2011, 04:28 AM
QUOTE(turnaround89 @ Apr 12 2011, 12:10 AM)
is the -4- relay board functional? if so, i may take it
Came out of a Working Car 8 months ago
carr914
Apr 15 2011, 09:10 AM
sixaddict
Apr 16 2011, 07:03 AM
Snt pm on rain hats
THX
QUOTE(carr914 @ Apr 15 2011, 07:10 AM)
carr914
Apr 19 2011, 04:17 AM
ElectroMotive HPV1 Crankfire Twin-Plug Ignition without the Plug Wires -NEW Lower Price $650 + Ship - You can't beat this deal with a stick - less than half what I paid
I had sold this, but the Buyer said there were pieces missing. I took it back and everything is there, however it may need a wiring splitter to do Twin-Plugs. This would be perfect for someone to run Single Plug and have a Spare Board & Coils.
Click to view attachment
r_towle
Apr 21 2011, 09:12 PM
seeing as you are one again selling a project, how about a 6 motor?????
Rich
carr914
Apr 22 2011, 04:28 AM
I just Sold a motor, but I can get my hands on a complete Rebuilt 2.5 MFI.
r_towle
Apr 22 2011, 10:30 AM
keep forgetting me???
Rich
carr914
Apr 22 2011, 11:06 AM
QUOTE(r_towle @ Apr 22 2011, 12:30 PM)
keep forgetting me???
Rich
The Motor I sold was the Pro-Built 2.7 that I was asking $15k. The MFI 2.5 would be much cheaper
T.C.
r_towle
Apr 22 2011, 09:47 PM
fair enough....
How much for the 2.5?
Rich
carr914
Apr 23 2011, 05:54 AM
$6k + Shipping
S Cams, MFI Pump Rebuilt to match the cams, Valve Covers Powder Coated, etc.
JKW
Apr 24 2011, 10:24 AM
QUOTE(carr914 @ Apr 23 2011, 04:54 AM)
$6k + Shipping
S Cams, MFI Pump Rebuilt to match the cams, Valve Covers Powder Coated, etc.
Alu case on the 2.5?
avidfanjpl
Apr 24 2011, 10:37 AM
Hey TC,
In case I don't sell my 6 conversion, is the 6 relay board functional?
I need one that works, just in case. Need a tranny too, but will get one out here.
What tranny would work? Is it stupid to get a sideshifter and regear it in case a true 6 geared case is unfindable?
HAPPY EASTER!
Thanks!
John
ps - Did you know that Steve and I grew up as nearly teens together? He was the SOB that infected me with the 914 bug after I got out of graduate school. I was down with my girlfriend in November right before he sold the Lotus and got the LE. I am on #6 with that 6 conversion I am messing with. All the others were 2L's. 4 of 5 were 1973 models.
Next time, I will make sure to meet you.
All the Best,
John
carr914
Apr 24 2011, 04:02 PM
QUOTE(avidfanjpl @ Apr 24 2011, 12:37 PM)
Hey TC,
In case I don't sell my 6 conversion, is the 6 relay board functional?
I need one that works, just in case. Need a tranny too, but will get one out here.
What tranny would work? Is it stupid to get a sideshifter and regear it in case a true 6 geared case is unfindable?
ps - Did you know that Steve and I grew up as nearly teens together? He was the SOB that infected me with the 914 bug after I got out of graduate school. I was down with my girlfriend in November right before he sold the Lotus and got the LE. I am on #6 with that 6 conversion I am messing with. All the others were 2L's. 4 of 5 were 1973 models.
Yes the Relay Board works ( I have 3)
Get a Sideshifter, no need to re-gear it. No need for a Real -6 case either unless the car is a Real six. On my Real -6, I had Dr Evil convert it to a sideshifter. Go to Evil's Tranny Clinic he is having out there.
I knew you were on the phone with steve when I called him last night. Did he tell you we lived in the same town in Pennsylvania in the 70's?
T.C.
avidfanjpl
Apr 24 2011, 04:36 PM
No, TC. I figured he met you in Tampa.
How do I pay you for the 6 relay board? Send me the prettiest one you have, please!
Paypal? How much more for shipping?
My address is in Paypal if that is how I send you the dough.
I am out with my gal for the day/night but could send the dough tomorrow.
No working paypal yet from my ipad.
What works?
Steve and I used to AX on the gokart tracks in the Pocono's with PCA back in 76-79
We did a couple of Watkins Glen'a together. Even Janie went!
Steve has old 8mm to video's of my wooing the girls at The Glen from 77.
Small world!
J
carr914
Apr 24 2011, 06:34 PM
QUOTE(avidfanjpl @ Apr 24 2011, 06:36 PM)
No, TC. I figured he met you in Tampa.
How do I pay you for the 6 relay board? Send me the prettiest one you have, please!
Paypal? How much more for shipping?
My address is in Paypal if that is how I send you the dough.
I am out with my gal for the day/night but could send the dough tomorrow.
No working paypal yet from my ipad.
What works?
Steve and I used to AX on the gokart tracks in the Pocono's with PCA back in 76-79
We did a couple of Watkins Glen'a together. Even Janie went!
Steve has old 8mm to video's of my wooing the girls at The Glen from 77.
Small world!
J
I will get one out in the morning and take it to work to get shipping cost - I need to know where it is going. Send me a PM
BTW, I was born in Watkins Glen
carr914
Apr 25 2011, 07:55 AM
QUOTE(carr914 @ Apr 23 2011, 07:54 AM)
$6k + Shipping
S Cams, MFI Pump Rebuilt to match the cams, Valve Covers Powder Coated, etc.
QUOTE(JKW @ Apr 24 2011, 12:24 PM)
QUOTE(carr914 @ Apr 23 2011, 04:54 AM)
$6k + Shipping
S Cams, MFI Pump Rebuilt to match the cams, Valve Covers Powder Coated, etc.
Alu case on the 2.5?
No It's built on a Mag Case
Click to view attachment
JmuRiz
Apr 25 2011, 01:31 PM
MFI 2.5 with s-cams would be a real blast.
carr914
Apr 28 2011, 09:27 AM
As I have Sold some pieces and lowered some prices on others
T.C.
carr914
May 3 2011, 04:40 AM
QUOTE(carr914 @ Apr 23 2011, 07:54 AM)
$6k + Shipping
S Cams, MFI Pump Rebuilt to match the cams, Valve Covers Powder Coated, etc.
Any Interest here? The owner asked me yesterday - it may go on the Bird.
T.C.
carr914
May 6 2011, 07:05 AM
Als914
May 6 2011, 02:01 PM
PM sent
Al
carr914
May 12 2011, 06:37 AM
1 More
, before I start listing on EvilBay
JmuRiz
May 12 2011, 12:26 PM
How's the rx7 cooler? Looks a little banged up...thinking it may be good for my 2.7 project.
carr914
May 13 2011, 04:24 AM
QUOTE(JmuRiz @ May 12 2011, 02:26 PM)
How's the rx7 cooler? Looks a little banged up...thinking it may be good for my 2.7 project.
Looks OK, Just Dirty. Needs to have the T-Stat removed & nice Fittings installed
Make me an offer
JmuRiz
May 13 2011, 07:40 AM
Ahhh, it's an internal t-stat cooler...may be beyond my skill (little-to-none) to take that on.
JmuRiz
May 13 2011, 07:43 AM
Ahhh, it's an internal t-stat cooler...may be beyond my skill (little-to-none) to take that on.
Als914
May 16 2011, 08:09 PM
QUOTE(carr914 @ Apr 11 2011, 04:54 PM)
A. 911 SC Front Calipers redone by the Master - Eric Shea @ PMB $385 & Ship - New Even Lower Price
Click to view attachmentB. Relay Boards 914-6 - SOLD, 914-4 - $30 & Ship
Click to view attachmentC. Bilstein Front Inserts NEW $175 Pair + Ship Mybe I should list these seperate as I saw a set Sell last week
Click to view attachmentClick to view attachmentSent you another PM on these Bilsteins
Al
carr914
May 18 2011, 07:11 AM
Al, Got your Payment, I hope to send them out today
T.C.
carr914
May 23 2011, 07:23 AM
I'll have more Stuff later this week
T.C.
carr914
May 30 2011, 05:48 AM
I added some New Items & lowered some prices today ( see Page 1)
T.C.
carr914
May 31 2011, 05:07 AM
-4 Oil Cooler - How about $35 Shipped
Click to view attachment
carr914
Jun 6 2011, 04:32 AM
911 Turbo/SC Front Suspension - Lower A-Arms, Torsion Bars, Aluminum Carrier and Beefy UnderBody Sway-Bar
Price Lowered $100, NOW Only $400 + Shipping
Click to view attachment
carr914
Jun 10 2011, 08:32 AM
carr914
Jun 13 2011, 09:57 AM
QUOTE(carr914 @ Apr 11 2011, 07:54 PM)
A. 911 SC Front Calipers redone by the Master - Eric Shea @ PMB $385 & Ship - New Even Lower Price
Click to view attachmentSteal these from me - $325 + Shipping
carr914
Jun 16 2011, 06:35 AM
QUOTE(carr914 @ Jun 13 2011, 11:57 AM)
QUOTE(carr914 @ Apr 11 2011, 07:54 PM)
A. 911 SC Front Calipers redone by the Master - Eric Shea @ PMB $385 & Ship - New Even Lower Price
Click to view attachmentSteal these from me
SOLD
carr914
Jun 22 2011, 02:53 PM
Updated
carr914
Aug 4 2011, 07:31 AM
as someone pm'd me about a part
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.