I am looking to replace the 10mm and 12mm washers for the front brake line fittings at the master cylinder. Are these specific "Porsche" parts, or standard brass washers?

Part numbers are 904 355 904 and 904 355 902, according to the PET.

I really need to get this done today but don't have time to go to the dealer.

Thanks,

Mike

Looks like these are specific to 914-6's. Washers to the banjo bolts should just be crush/sealing washers...

here's a link to McMaster:

http://www.mcmaster.com/#copper-sealing-washers/=cudaht