See attached pictures 1 of 3.

Picture 2 of 3.

Picture 3 of 3.

Sweeeet! Looking forward to seeing that combo for real

Sweeet!

You've fallen into the cruzer crowd.. lol...

Looks 968 ish to me!

Nice!

(might I inquire cost?)

way too cool, that took a lot of work

Bernie

Here is a picture of the inside of the trailer and it will haul 245 lbs.
The cost was about $ 3500.00 for the trailer w/o shipping.

Bought it from a company in Canada.

Show us the hitch on the 914! How/where does it connect?

i think it would be cool to have a trailer from the targa bar forward....and tow it backwards....

EDIT: scratch that.. somethink like this would be cool

lol

I was originally going to do that , but could not find someone to modify the rear end tub.

Here are some pictures (1 of 3) of the hitch.

I forgot to mention that the bumper is a 916 fiberglass, Picture 2 of 3

picture 3 of 3

Wow, what does the hitch look like under the car? What does it attatch to?

Nice.....

Here is 3 pictures of the hitch set up. The first two are of two pieces of metal. One piece goes inside the trunk the second piece goes to the out side of the trunk. There is also a square hole under the trunk latch. The third picture shows two pieces of angle iron are welded to the strip on metal that is in the inside of the trunk.
Here is picture 1 or 3

Here is picture 2 of 3.

Here is picture 3 of 3.

Sorry only one piece of angle iron was welded to the bottom and two straight pieces welded on top.