Used Boxster Calipers, Fronts and Rears
-Comes with used pads/hardware, pistons move without trouble, bought but I changed my mind before I put them on
-986.351.421/422 (F
-996.352.421/422 (R

Brand new 3.5" (front) to boxster caliper adapters
and brand new stock 914 (rear) to boxster caliper adapters
-Brand new from a914guy (Rich)
-Bolts still wrapped up

Calipers + Adapters: SOLD
*I will sell front/rears separate only if the rears sell first

Used ATE 23mm Master Cylinder
-bought this on pelican forum, used but looks to be in excellent condition
SOLD

Bump!

*Bump* Placing an order for brakes for my other car today so I need these gone.

BUMP, Lowered price to $850 for calipers and adapters for a limited time!

What size rotors are used with these calipers?

What model Porsche do the rotors come from?

"The front rotors that this setup uses are 84-89 911 Carrera fronts. These fronts may have come with your strut set. Measure the width and if they a 22 - 24mm wide then you have what you need for the fronts. New, the rotors were 24mm wide. Stock SC or earlier rotors have the same OD but were 20mm wide.

The rear rotors are the stock rotors from 70 - 83 911s. They were vented and 20mm wide. "

Monday bump! Still need these gone, please lowball price.

bump!

What are you looking to get for the rear calipers w/o the spacers?
You can pm me with the info.

Thanks, Luke

I sent you an e-mail on the rear calipers.
If you could respond to the e-mail it would be the best way to get a hold of me.

Luke