smaller gear has some "gauling" per doctor evil - thus low price.

nicer h gear typically sells for $350+-

large gear - far less gauling.

i will try to take better pics in sunlight tomorrow.

i would say dogteeth appear to me to be servicable as well.

jim

This is a very good price for an "H" gear. This gear can be flipped and used for 5th gear (ratio somewhere around 5.80s to 5.90s. I had the Great Doc Evil of the most fearsome "EvilWorks" build my transaxle with this gear in 5th. It should give me rpm in 5th somewhere around 2800.

See the Doc on specific questions. He does build a "mean transaxle".

Steve

doc did mine too - stock gearing - as this will be my local car.
hope to suby engine and trans my other 914 for longer distance travel.
jim

more pics

It has Frenchmen on it? What is the gear ratio and which gear is it?

it is H gear - as mentioned in title.

32:19 when flipped and used as 5th gear in a 901 transaxle.

what is frenchman?

When this gear is "flipped" to use as a 5th, the galling will be on the decelerating side of the tooth. There will be gear noise when you let up but it may be fine to use. Brad Mayeur

thanks - i bought this set from you - and i will use it myself if in put a V8 in my 1975, but i am leaning suby/suby in that car - for the ultimate driving machine with good gas mileage and nice rpm range : )