I M looking for 20 100mm wheel studs and open nuts, can anyone point me in a that well sale them at a fair price and not try to nail you with a trumped up shipping cost.

http://www.apexcompetition.com/productinfo/

Neither do i see any 100mm on that page nor do they look like the press in studs used on a Porsche.

I bought mine years ago from HPH and they were expensive back then. Something like $12 per stud. But, i live close so there was no shipping.

Any race-shop that deals with Porsche cars should be able to get you the correct ones.

You can purchase 100mm from there and I didn't read that he is looking for press in type

He said 20 studs, which implies 5-lug suspension which typically uses the press-in type.

Maybe just too many assumptions on my side.

I got mine from GPR. Wasn't that expensive either.

I had a bunch that I bought from Brumos. i can't find them, did I sell them to somebody? Armando wants my Set & if I just kicked them under the Washer I'm gonna kick myself in the Ass.

Even 10 Years ago At Cost they were $10 a piece

http://www.swayaway.com/wheelstudsandnuts.php

Those are the ones GPR got for me!

Had a helluva time finding a vendor, then bam, saw GPR on the list. No further looking needed. Had them in a couple days.

$4.00 for 100mm studs, are these for real?

Yup. And I cut mine down in the lathe since I ended up only needing 80mm and they were out of stock. They seemed like good quality hard steel. Made in USA.

Well I just got off the phone with swayaway, they are a bunch of tater-heads. They said they don't sale to public. So I asked if they could give me a dealer in my area. The Lady on the phone said NO, I would have to send them a email to tell them what I was looking for and they would decide then if they would sell them to me or put me in contact with some one else. Now what has happened to customer service I was on the phone with a live person wanting to spend my money with them and they would not even give me the name of a Dealer. I guess they ether do not need any new customers or my money is not good enough for them.

Thanks for the leads and sory I did not state 5 lug I did convert to 911 suspenion.

Just order through GPR http://www.gprparts.com/shop/

Do you not read? GPR

I cant find them on the GPR site. Can yall give a link?

The site is still in progress. Just call Jonathan.

You ask" Do you not read?" I believe you might have jumped the gun on the sarcasm. I have a fab shop and have been self employed since 1988 I buy the products I use from the source, wholesale or at least jobber so why would I go through a middle man. I very much appreciate the the lead on Sway-a-way. I followed the link and looked over their site and the products they offered. I was interested in getting more info and asked, Who I would need to talk to, What I would need to provide so I might be able to offer my customers their products as a option. That is when I was told I would need to email them with my request. I can not understand why at the very least be sent to a voice mail to be contacted at a later date. I can only imagine what my customer base would be if when a potential customer would contact me I would say, sorry you must first email me with you request . I M old school, I like, and respect a company that still offers personal customer service. Once again I thank you for the lead it was very helpful and was just what I was looking for, as my supplier only had SAE studs used in roundy rounder racing.
PS I could not find them on GPR, I did find them, along with the lug nuts at Preformance Products and ordered them.

At least you got my sarcasm
You never said you wanted to buy them wholesale, just where to get them...

A google search quickly produced these for $5 each, which is very cheap:

http://www.automotion.com/wheel-stud-100mm...or-porsche.html

So what did you do differently than KennyK to buy from this group?

Called Johnathan at GPR... was either the same price, or a couple cents more, but as always GPR came through.

German Parts Restoration sells for about the same??

Yup, and got my free gloves too !

What was the deal with the free gloves?

Can you guys add some more quotes please?

Just for Andy GPR includes a pair of nitrile gloves with every order.

Then dr. Evil pays you a visit

...just be sure that the fastener is manufactured to the required specification.

<<<Not all fasteners are the same >>>

I was paying $3.50 to $5.00 per .2500UNJF-28x 2.500 fasteners rating 180KSI
for 10/10/20g design requirement; $14.00 to $18.00 on .3750UNJF-24 x 3.50
SHCS.

<<<<Do Not Scrimp on fasteners, they are doing all of the work for you>>>>

fasteners for wheels also have specification requirements, such as projected
tolerance over its' length, underhead radius to shank design, thread design
and minimum root diameter and secondary process controls to guarantee
specified strength.

<<<Ensure that you're getting what you paid for>>>>

...just sayin'