Hi all,
I posted this under the classifieds as well, but I got another set of carbs missing pieces. This time all I need is the idle jet and idle jet holder for a Weber 40 IDF (the late ones with the o-rings). However, its tough to find a distributor that carries both. Seems like everyone only has the jets. Wondering if you folks had any suggestions? Thanks!

-George

i saw some nice ones that use an allen wrench instead of a slotted screw driver. look a about 3/4 down this page. right below the ida jet holders are the idf idle jet holders. if you end up getting them will you post back with your thoughts?

http://www.jayceevw.com/new_products

Try Readline or Empi.

Yeah, I saw those as well. Ten dollars a piece and then I've got three of the old style and one of the hex style! Might be the only option though. I'll try Redline tomorrow I suppose.

-George

oh oh, try this guy. he had a bunch of little odd ball weber parts i needed. http://www.aircooledengineering.com/products.htm

https://www.pegasusautoracing.com/group.asp...upID=WEBERIDFPJ

have you called aircooled.net?

Wow, thanks for the response fellas. I have checked all of those websites at one point or another in the past. I suppose this isn't one of those "point and click" parts. Therefore, I'll give one of them all call tomorrow. Maybe aircooled.net?

Thanks again

Here's one where you order right off the parts diagram:

http://www.carburetion.com/diags/40IDFDiaginfo.asp

Atu

I had great service from aircooledparts.

try AIR COOLED ENGINEERING. 801-943-1234.

k

Stay away from CB Performance. I used them for years but they charged me an arm and a leg to mail me some gaskets. Never again.

I use Pierce Manifolds whenever I can for carb parts.

I've had real good luck with these guys:

CARBS UNLIMITED INC.
727 22nd st NE
Auburn Wa 98002

Questions and Information (253)833-4105
Order Line 1-800-994-CARB (2272)

You can order off of the parts diagrams here:

http://www.carburetion.com/Weber/weberdiagrams.asp