I have two sets of Dellorto DRLA 36's. One set is rebuilt and will be going on a car. The other set needs to be rebuilt. Any consensus on who can rebuild these carbs right?
Full Version: Who rebuilds Dellortos?
Hi,
If the shafts are ok, do it yourself. Hardest part is cleaning them and setting the float. I just did the Pine-Sol method and it does work.
A disassembled Dellorto 45 body fits in the 2.5 L harborfreight ultrasonic cleaner.
Here's a link for a 20% off coupon good till 8/31
coupon
If the shafts are ok, do it yourself. Hardest part is cleaning them and setting the float. I just did the Pine-Sol method and it does work.
A disassembled Dellorto 45 body fits in the 2.5 L harborfreight ultrasonic cleaner.
Here's a link for a 20% off coupon good till 8/31
coupon
Send them to me Bill. They are simple.
QUOTE(SUNAB914 @ Aug 20 2012, 08:17 PM) 
Send them to me Bill. They are simple.
These are pretty grungy! You must like a challenge!
CB Performance used to be the U.S. importer for the Dellorto's and still have what is probably the best parts selection in this country. They also wrote both the Weber book and the Dellorto books, and sell them for about ten bucks each. If you're going to run those carbs that may be the best investment you can make, along with some good air cleaners and the CB Jet Doctors.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.