Eric_Shea
Nov 4 2012, 07:18 PM
Wallowed out bottoms? OK. Spindles too far gone for street camber? Not a problem. Arms bent in an accident? Sure.
I'm looking for struts for a trade show display. I want to blast them, repaint them and have calipers mounted to them for trade shows.
I'll be happy to pay to have them shipped out of your way.
Looknig for:
914 Struts
Early 911 Struts
Later 911 Struts (3.5" spacing)
Let me know what you have please.
914werke
Nov 4 2012, 08:40 PM
Do you want early or Late /4 struts? I think I have a pair of each
Eric_Shea
Nov 4 2012, 09:09 PM
Thanks Rich.
It doesn't matter... I have a late here as well. Those I can mount anything on; 356, early 911, M-Calipers, Brembos.
They won't have rotors, just calipers mounted on them.
gcrotvik
Nov 6 2012, 08:41 AM
Hey Eric,
I have a mismatched set of early Boge 911 struts (3" spacing). One has a 16MM spindle thread and the other has 18MM. Other than that, they are identical and in nice condition. I will send them your way as I owe you for all your help.
Greg
Eric_Shea
Nov 6 2012, 08:56 AM
Wow! Very cool!! Thank you!
bdstone914
Nov 8 2012, 08:52 AM
If you or anyone else needs the spindle nut for the 16mm struts I have them.
It is a fine thread nut unlike the 914 course thread one. They are both right hand thread on the 911.
Porsche wrongly lists the 914 part for the 911 early struts. I found that 70's Mercedes use the correct nut for early 911 struts.
I need to stop spending so much time in Pick a Part yards.
Bruce
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.