I'm installing a new heater cable to the flapper boxes. The length isn't matching up correctly. Does anyone know the proper lengths for left and right side. I remember Eric Shea had an issue with this but I couldn't find the post. thanks, mark

There are 3 versions.
-6 914.424.075.00
70-74 PCG.424.075.01
75-76 914.424.075.02

Mark,
Is any of the sides reaching ? One side is longer than the other , you may have them flipped

I have PCG-424-075-01-OEM from Pelican. I have a '71

The left side is too long and it's my understanding the longer cable goes left. I know I can get under the car and measure. I was hoping someone had lengths already or could find Eric's thread. thanks

This thread?

http://www.914world.com/bbs2/index.php?sho...hl=Heater+cable

Thanks!

The driver's side is 38 inches.

The passenger side is 40 inches.

Mine came prebent wrong too!

Hope this helps.

Terry

My cable came with a 10" differential (brand new in the porsche wrapper). I bent it so the passenger side was 2" longer than the drivers and it fit perfectly. Thanks guys!