Thank you all for the help.

I have all parts coming.

Neil

Needed:

I'm all set on the bales/bails: two,good bales to hold valve covers on the 1.7L engine.

Spring and plunger that goes behind the allen head plug near the oil filter.

quote name='lynch' date='Feb 4 2013, 06:05 PM' post='1814948']
Needed:

two,good bales to hold valve covers on the 1.7L engine.

Spring and plunger that goes behind the allen head plug near the oil filter.
[/quote]

Neil........I am adding this picture to your post to help identify which parts you're after...Which one do you need? Jerry

Click to view attachment[

Jerry,

Thank you much.

The Spring and plunger on the left are what I need.

Neil

[quote name='pilothyer' date='Feb 4 2013, 09:40 PM' post='1815053']
quote name='lynch' date='Feb 4 2013, 06:05 PM' post='1814948']
Needed:

two,good bales to hold valve covers on the 1.7L engine.

Spring and plunger that goes behind the allen head plug near the oil filter.
[/quote]

Neil........I am adding this picture to your post to help identify which parts you're after...Which one do you need? Jerry

Click to view attachment[
[/quote]

Thanks Jerry,

The spring and plunger on the left are what I need.

Neil

All set on bales/bails.
Neil

I have the spring, plunger and the plug off of a 2.0L engine.
I am sending you a PM.

Neil, after further discussion with you, being that you need the piston, spring and closing cover that protects your oil cooler from the thick, cold oil, you need the larger set on the right in the picture...........Jerry

Hi Jerry, thank you much for the help and clarification. I have all parts coming.

best,
Neil