Looking for a 96mm piston/cylinder set for 1.7/1.8 engines. Either used or new would work. I'd figure I'd try here first. Let me know what you have. Thanks.

I may have a used set, if not 3 cylinders. They've been sitting on the shelf for years

I'll be able to take a look this weekend

I have a used set of the NPR slip in 96mm for the 1.7, will not work with 1.8 heads. They have probably 5000 miles if that on them. Have been storing them for at least 18 years. Yours for $50.00 plus shipping. Let me know and I can get pictures.

Thanks,

Matt

I have a set of Mahle that have been bored out to 96 with rings

LMK

David