Now I can't find 
about it here or in my Haynes manual. What gives? 
I'd like to make sure my axles don't fly off on my way to the WCR.
Full Version: CV Bolt Torque
I know when I installed my CV's, after my rebuild, I found the torque specs here. Now I can't find about it here or in my Haynes manual. What gives?
I'd like to make sure my axles don't fly off on my way to the WCR.
Now I can't find about it here or in my Haynes manual. What gives? I'd like to make sure my axles don't fly off on my way to the WCR.
page 92, 31 ft lbs, threads should also be free of grease as well
You did use the proper Schnorr washers as well, didn't you?
31 ft.lbs...got it thanks!
Yes Schnoor washers in place! Just want to re-torque before the long drive.
Thanks fellas!
Yes Schnoor washers in place! Just want to re-torque before the long drive.
Thanks fellas!
Hey 
QUOTE(euro911 @ Jun 8 2013, 11:45 AM) 
Hey
You driving back to the homeland?
Hope things are going well for ya!
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.