Got an update on my first electronic product. It's been in the works for 6 mo or so. I built a proof-of-concept unit first. This is the first 'production' unit that I'll be testing.

I think it's going to be an electronic HP generator, but feel free to guess.

FI related?

Well, I am curious. Are there traces on the back? Why are some holes surrounded by square plating and others by circle? I like doing this stuff, but don't know a lot about it. I made the A/F project on the Pelican board but never installed it. I hope it electronically boosts HP.

Has any one any experience with retard advance units that you dial from the passenger space btw?

Saw your post with the yard stick for scale on Facebook.

I can't even figure out where it would fit in my car!?!


Click to view attachment

Pin selector for checking cylinder data

Dip switch array for a sim box or different speeds on a vibrator?

Either a conversion kit for LED lighting, or a microsquirt interface board?

Stu

I suspect this will be used on my 240Z after I go to aftermarket EFI and ITB's...

I know.. electronic turbo for a 1.7! This is just the foundation to bolt it to.

I've seen and designed a bunch of circuit boards, and I can say without a doubt
that that is a circuit board.

Since there doesn't appear to be any electronics there, what you got is basically
a hole-mover.

relay board

nope there is only 4 ,,,it should have 6 though

Can I play too?

Cheese grater.

One astute Facebooker already guessed it.

Click to view attachment

Cribbage board?

Well I see the 4 cylinder firing order on the left side.

Its a 10 segment led read out board with bcd inputs.

I don't have a clue, but you have some cool stuff going on as shown in your FB page. Do you have a finished pic of Andy's front hood?

Warp Drive Fibulator with a flux generator surge deflector. Looks similar to the one used on the SR71 Blackbird but that's classified TS.

Looks like a breakout board. Since there appears to be four outputs, it's either for individual coils or injector drivers.

--brett

path translator for the turboencabulater?

A new fangled cribbage board

Next generation game board for "Battleship"? Please say yes.

What is that Merkel scale your using?

Continuum Transfunctioner?

Dude, where's your car?
Where's my car, Dude?

Dude, where's your car?
Where's my car, Dude?

Dude, where's your car?
Where's my car, Dude?

Dude, where's your car?
Where's my car, Dude?

Dude, where's your car?
Where's my car, Dude?

Dude, where's your car?
Where's my car, Dude?

Dude, where's your car?
Where's my car, Dude?

Dude, where's your car?
Where's my car, Dude?

Dude, where's your car?
Where's my car, Dude?

Dude, where's your car?
Where's my car, Dude?

I thought you can't turboencabulate a 914?

It's a meter stick. Like a yard stick, but not.

You can but you need to anneal the pre-famulated amulite to keep it from delaminating from the logarithmic casing. This would result in depolarization of the odd numbered marzelvanes and could, in turn, affect the alignment between the waneshaft & the fam.

Other than that, not much harder than a turbo.

Stu

Meh, I already have one.

I wanna know!! Tell us!!

How long are you going to make us wait?

He's messin' with ya, it's just something random he found at a garage sale.

Miniature Relay board?

Come on guys,

Its for the turbo encabulator.

this video will explian it all...


http://www.youtube.com/watch?v=rLDgQg6bq7o


Cheers

Mike

"I tol' him we already got one!"

--DD

Butt plug.

https://www.youtube.com/watch?v=cUhtv2XOolU