Been working on the turn signals all day. Now I have two extra wires both with a jumper. One is green/black & white,the other is blue & white and both flash power when the turn signals or the emer. is activated . Good news is I did get the horns working . On another note I met up with Airforce pilot here in P`cola that has a`74 Zambiz (sp) green 1.8, very nice. He should be joining our group soon.

I think the blue and white is illumination for the dash.
Not sure about the GBW wire.
I guess I could go out to the garage and get a Haynes manual. I'm usually able to figure out any wiring stuff with their diagrams.

I have a haynes manual but can`t seem to find them! :headbang:The real confusion is that the power appears to be coming from the flasher switch

bk/gr/wt goes from pin49a of the flasher switch to R on the column switch.

It also goes to pin 49a on the flasher unit

bl/wt goes from flasher pin K to turn signal indicator on tach