They are 17 inch fuch replicas. 7inches wide with 5.5 inch back spacing. They currently have 215s on them.

$500 shipped...firm



Photo of them on my car with hefty spacers!

Almost forgot, these have not been driven on. I also will include the 2" spacers and 80mm lugs required to mount them to a flared car for an additional $250 shipped.

Thomas

Reasonable offers?

Thomas, these look amazing on your car, why sell? WOuld they look as good on my silver car?

I found a set of three piece wheels that are more what I need... Plus, I am running a new set of rear flares. They are old IMSA flares and I need a 10 inch wide wheel to make up the room and the flares look soooo good! I could space these out further or make a custom hub set... But I thought, I'd rather see them on a stock flare styled car. They would look good on Apollo!

Thomas

Do they fit on a non-flared car w/out the spacers?

Yes they will, but they may need 205's so they don't rub the fenders.

Thomas

Are you open to any trades???

Possibly, what do you have in mind?

P-car parts only though...

This will give you an idea, pix on my blog..
I am looking to get rid of almost all my cars & stuff, I just want to keep my 2 SCs, 914-6GT clone, 76 914, 87 924S & 88 Carrera, and the parts to finish the ones needing to be finish. This would be a great start for someone wanting to get into the Porsche parts biz. I just don't have time as our other company is keeping me too busy to play with my hobby and after over 20 years, I just have more than I can deal with at this time. Willing to accept trades too for late model Porsche, need a inground pool, what ever. More than is listed here, I just don't have time to go through & list everything.

Porches, Projects, Parts & Wanted!!!
See Pix at http://www.facebook.com/media/set/?set=a.4...01.186854959512

Porches, Projects, Parts & Wanted!!!
See Pix at http://www.facebook.com/media/set/?set=a.4...01.186854959512


944 Track car with Broadfoot Racing bodywork (the bodywork has Daytona race history) fiberglass hood, lexan windshield and rear hatch, GT Lemans wing. It is a stock engine except a chip Broadfoot K&N cone filter kit, Jet-Hot coated headers,Broadfoot Stainless exhaust and Welt. throttle cam. Broadfoot billet euro style alt, mount, Broadfoot billet power pulleys, Full custom cage with nascar door guards, 28MM front Welt bar, strut brace, have adj Konis and 951 brakes, haven't installed them yet, but they are part of the package. 2 sets of 7&8X16 Phone dials, 2 sets of 7X15 phone dials for auto-X, TRG drivers set finishes it out. Because of these mild mods, it would have to run GT4 in PCA and SPO in SCCA. It is a very fun and reliable DE car. $12,500
Attached Image

88 951S Caged race car tub!!!
I have a straight, nice clean BARE 88 951S caged tub. This tub includes Crawford carbon fiber fenders & roof skin (has the non-sunroof look), Crawford carbon nose, lexan windshield, rear hatch , glass B-wing, fact Euro rear bumper, some susp., Turbo Cup style strut brace, fully caged, connected at susp points. Have most rear susp. This is a clean, tub with good paint and clear title but would be a ton of work to return to street. One of 718 that came to the US in 1988, and one of 62 Black 944 Turbo "S" Porsche's delivered in 1988. This is a big project but if you crashed your Turbo, a great way to move up. Open to trades, need an enclosed Trailex or an open one for one car, shop tools, race parts for my other cars, ect. $6,500
Attached Image


FS Caged 87 944, by Racers Edge
Caged tub, prepared by Racers Edge, yes, there is rust, but it also has 935 styled adj camber boxes. For sale CHEAP..
Attached Image
Seam welded, was told the cage was $5K(and it is nicely done) but after acid dipping it clearly wasn't properly cleaned & prepped, hence the rust. Was set up with 968 wide body kit, rear is tubbed.

Either media blast and build it up, or cut out the cage for another tub.

Custom Built 2 Car Trailer

This trailer was custom built to carry 2 VW sandrails or 2 Formula Vs, we were going to have it modified to hold a Porsche & Lotus. '
The guy I had lined up to do it has gone into another line of work, so now, it won't work for me. It does need some work (and tires) but it tows great.
Attached Image

Would like to trade for a 914-6 or 911 Porsche.

911 PARTS

Complete set of 912 Guages

Used 911SC Cams

BAE Turbo Kit for CIS

964 used nonfunctional pop up tail

Cheap 964 Tail Lights one is cracked & faded & cracked center reflector

Racing Dynamics Performance Chip,24 pin, # 200.90.10.20, with instructions

K&N Cone Filter kit for SC, Never used

74-77 911 bumper extensions & rockers

Fiberglass Carrera bumper extensions .

Very low mile exhaust off 88 Carrera

1966 911 Tail lights

1967 911 Complete rear bumper

1973 right & left side bumper ends and bumperetts Early rocker panels

Steering rack

High back seats, need recovering

80 right fender "74 front fenders,

73 hood,doors & bumper

Green 911 Tach (Part# 901 741 302 01)Very nice!!

SW control arms vented rotors. Complete with T-bars, rotors, calipers & steel arms.

Pop Out Rear 1/4 Windows

Glass Turbo "S" Glass 1/4 & Rocker passenger side

Glass F&R 965 Bumpers

.

MISC. 944&928 PARTS

Black, rough, 951 bumper cover, inner bumper, fenders, dented header panel,& 1 headlight cover.

1986 ,Front & rear bumpers

Rear 944 1/4 1986 doors, mostly complete, red


Nice but needs paint right side 944 Turbo fender.

88 951S Air Bag steering wheel with bags, dash bag, harnes and brain.

Interior rear view mirror

Ashtray Tape carrier

Sunroof wind deflector

Horns

Sun Roof bags

Early stock swaybars

Intake manifold

924 Snail Tranny

931 snail tranny conversion (everything to swap into 924 or 944)

931 parts engine


1986 928s hatch with spoiler

8 Valve 928S4 head (86-88)


MISC. 914 PARTS

914-6 Custom Oil Tank

Early heads

light assembles

engine lids

Front &rear decklids

Fiberglass Rockers for a Chalon bodied 914.

986, Bosxter
Stock header with cat.

complete rear strut, with brake caliper.

Wheels

8&11X15 Center Lines, Perfect for the vintage racers..

6X16 Flat Forged Rims

7X16 Flat Forged Rims

7x16 phone dial,early 928

(1) 7X16 Etoil 5 star(new)

(5) 7.5X16 Ronals (4 on 108 bolt pattern)

Pair of ATS 931 web (BBS) style wheels & stock steel spare.

Set of 5 BMW X5 wheels

WILL TRADE,WANT FUCHS

$500 shipped firm

Will add the spacers or ship them separately for $250

Do you know if that's the right back spacing for a narrow body.
I don't suppose you have any pics or trial fittings on a narrow body

Thanks in advance.

I looked into this. They will fit a narrow car. The only thing that I'm not sure of is whether or not the tires will. Some folks have stuffed 215s under their cars with rolled fenders but I'm not sure if they have without rolling them.

As for photos, I do not.

Is there anything that you are looking for, I have other stuff not listed..

These will fit a stock car with 1 inch spacers.
I believe the stock back spacing is about 4 5/8 inches.

Could you show picture from the rear that shows the rubber width?
I just put on flares, looking for wheels.

Rich

I'll send you a PM...

Rich,
I will look for a photo. I am not sure if I do or not.

These fit with no spacers, 205/50x17 tires,
the paint burn is from Fuchs 15x7 that are offset differently.

Don't make me Buy These.............good deal and they look Great...

Rich,
I apologise, I am not sure why but I cannot find any in the photos i have of the car. I would take some for you if the car was assembled enough to take them. sorry!

Thomas

Thanks again Jeff for supplying photos of the car with them mounted!

the only difference is the finish.

Thomas

215's and flares work good as per your photo's...Mine show that they will fit without spacers or fender mods with 205 tires on a narrow 914...

I will take them

Responded to your PM

Thanks,
Thomas

If he passes , I will take em, I love mine...

Thanks again for helping with the sale Jeff!

These have been sold...