Tonyorlo
Nov 2 2013, 12:17 PM
tweet
Nov 2 2013, 12:30 PM
pm sent
Covvers
Nov 2 2013, 03:35 PM
Hi,
I'm after roughly this section posted to Melbourne, Australia. I can see that it's dented, but that's ok, so long as it's not rusted it'll be in much better shape than mine. I've also sent you a PM.
Andrew
Click to view attachment
toadman
Nov 2 2013, 06:38 PM
Pending a few pictures and a price for the piece, I would like first dibs on the interior light in the center of the backpad. Thanks!
colingreene
Nov 2 2013, 08:11 PM
I need a stub axel
mepstein
Nov 2 2013, 08:40 PM
Give me a ring if you have an oem steering wheel. Thanks. Mark
Mark.Epstein@me.com
Tonyorlo
Nov 2 2013, 11:17 PM
I replied to all pm's, and sent some to people with questions.
I made a list of things I know the car has. I will test anything electrical before selling.
Firewall pad (behind seats) $15
Side engine grills $10 ea
Front trunk latch w/striker $15
Front hood springs w/ hinges and hardware $20 both
Gas tank $20
Wiper motor w/arms $40
Passenger side Air flap in cowl $10
Air filter box $15
Rear trailing arm w/strut $25 ea.
All prices without shipping
I'll cut off any sheet metal too. There's probably a lot more I'm forgetting.
Tonyorlo
Nov 3 2013, 07:17 AM
Tonyorlo
Nov 4 2013, 07:27 PM
Pic update
Top $40
Sound dampened behind seats $15
Blower in cowl, behind dash $20
Wiper assembly $40
Antenna motor, bad antenna $10
Gas pedal $10
Blower in engine compartment $15
Plastic trim for cowl(paint will be off before sold)$10
Air filter box w/ sensor $30
Passenger side a pillar trim $15
Washer fluid jug $10
marcus p
Nov 5 2013, 12:50 PM
QUOTE(Tonyorlo @ Nov 4 2013, 07:27 PM)
Pic update
Top $40
Sound dampened behind seats $15
Blower in cowl, behind dash $20
Wiper assembly $40
Antenna motor, bad antenna $10
Gas pedal $10
Blower in engine compartment $15
Plastic trim for cowl(paint will be off before sold)$10
Center console, in ok shape $15
Air filter box w/ sensor $30
Passenger side a pillar trim $15
Trim above windshield $15
Washer fluid jug $10
i think we could add that to the tranny we're working on if you wouldn't mind... by that I mean the console. lol
Tonyorlo
Nov 5 2013, 06:43 PM
I sent you a PM Marcus
Price list a few posts ago is updated.
Here is some other parts I pulled off the car today,
Light buckets, rubber seal in good shape on both of them $15 ea.
Head light motors $10 ea.
Tonyorlo
Nov 6 2013, 06:07 PM
Passenger side air flap $10
Driver side defrost vent $15 (sorry for the bad pic)
Side shift trans shift rod cover at trans, in good shape no cracks $15
KENNY
Nov 6 2013, 06:45 PM
I will take drivers air flaps
tweet
Nov 6 2013, 06:48 PM
Hello Tony,
That;s the shift cover I was asking you about.
Tonyorlo
Nov 6 2013, 07:12 PM
QUOTE(tweet @ Nov 6 2013, 04:48 PM)
Hello Tony,
That;s the shift cover I was asking you about.
Oh, sorry I miss understood. It's yours!
Kenny, I sent you an email with pics. Did you get it?
carr914
Nov 6 2013, 07:12 PM
This Center Console is out of a 911/930 is worth way more than $15 - I don't need one (I have a couple) put it on Pelican for 4x your Price
Click to view attachment
KENNY
Nov 6 2013, 07:33 PM
QUOTE(Tonyorlo @ Nov 6 2013, 05:12 PM)
QUOTE(tweet @ Nov 6 2013, 04:48 PM)
Hello Tony,
That;s the shift cover I was asking you about.
Oh, sorry I miss understood. It's yours!
Kenny, I sent you an email with pics. Did you get it?
No I didn't get the email . If the plastic hoses are good I will take them .
Tonyorlo
Nov 6 2013, 10:57 PM
QUOTE(carr914 @ Nov 6 2013, 05:12 PM)
This Center Console is out of a 911/930 is worth way more than $15 - I don't need one (I have a couple) put it on Pelican for 4x your Price
Click to view attachmentWell I guess Marcus P got a good deal then lol.
arcadeforever
Nov 7 2013, 10:12 AM
Do you have the ignition key and lock available?
Tonyorlo
Nov 7 2013, 11:21 AM
Yeah I do. Ill check to see if it actually works, I have 1 key. Any tips on getting it out?
arcadeforever
Nov 7 2013, 12:11 PM
here is the proceedure
http://www.pelicanparts.com/techarticles/9...tion_switch.htmQUOTE(Tonyorlo @ Nov 7 2013, 12:21 PM)
Yeah I do. Ill check to see if it actually works, I have 1 key. Any tips on getting it out?
t collins
Nov 7 2013, 02:34 PM
Is the fresh air control available?
Thanks, Tom
rick 918-S
Nov 7 2013, 03:33 PM
I want the trim above the windshield. The ones the visors attach to. PM sent
Tonyorlo
Nov 7 2013, 05:05 PM
Pms sent and replied to
Tonyorlo
Nov 8 2013, 03:04 PM
Picture update
Rear glass $20
Side covers $10 both
Passenger side marker plate $10
Lamp in rear trunk $10
Glove box door $15
Knee pad vents $10 ea.
Knee pad in good shapes few small cracks pictured $30
Tonyorlo
Nov 8 2013, 04:40 PM
Hvac controls $20
worn
Nov 8 2013, 06:52 PM
Thanks for super prompt response.
Evil914
Nov 10 2013, 08:04 AM
QUOTE(carr914 @ Nov 6 2013, 05:12 PM)
This Center Console is out of a 911/930 is worth way more than $15 - I don't need one (I have a couple) put it on Pelican for 4x your Price
Click to view attachmentYeah,let's gouge em for every penny we can
KENNY
Nov 10 2013, 08:07 AM
Do you have drivers side speaker cover
eyesright
Nov 10 2013, 09:04 AM
PM sent for steering cover.
Tonyorlo
Nov 10 2013, 07:23 PM
Kenny, Sorry but I dont have the speaker covers.
Pm replied eyesright
Im taking one for the team evil haha
1988Hawk
Nov 11 2013, 04:58 PM
I will take the Heater Blower for $15.00.
How are the CV's?
Thanks,
Jim
mhenderson57
Nov 12 2013, 08:08 AM
Do you have the cable that goes from the parking brake handle to where the cables split?
Tonyorlo
Nov 12 2013, 04:19 PM
No I'm sorry, it was rusted and pretty torn up.
914skraper
Nov 12 2013, 05:31 PM
How about the trim piece from the inside top of the targa bar? to 80129
Tonyorlo
Nov 12 2013, 06:35 PM
I'm sorry it's sold. I'm slacking on my list. I will update it now.
914runnow
Nov 13 2013, 10:16 AM
Hi there..still wondering on the main harness??
they can be 'cut out' too..it is about 1/2 hour job
with the body stripped...and still be intacted..
unless you meant the harness is 'hacked up'.....
thanx Rx
Tonyorlo
Nov 13 2013, 11:24 AM
QUOTE(914runnow @ Nov 13 2013, 08:16 AM)
Hi there..still wondering on the main harness??
they can be 'cut out' too..it is about 1/2 hour job
with the body stripped...and still be intacted..
unless you meant the harness is 'hacked up'.....
thanx Rx
Hey, sorry I didn't get back to you. I was looking at it and it's not in terrible shape. I think a few things have been cut off here and there. I won't be able to check it out until Saturday. I will pm you with some pictures and info on it. I don't mind cutting it out
914runnow
Nov 13 2013, 12:30 PM
QUOTE(Tonyorlo @ Nov 13 2013, 10:24 AM)
QUOTE(914runnow @ Nov 13 2013, 08:16 AM)
Hi there..still wondering on the main harness??
they can be 'cut out' too..it is about 1/2 hour job
with the body stripped...and still be intacted..
unless you meant the harness is 'hacked up'.....
thanx Rx
Hey, sorry I didn't get back to you. I was looking at it and it's not in terrible shape. I think a few things have been cut off here and there. I won't be able to check it out until Saturday. I will pm you with some pictures and info on it. I don't mind cutting it out
awesome and thanx for the quick reply...
and just to make sure..the car is a 1.8??
Rx
Tonyorlo
Nov 13 2013, 12:44 PM
QUOTE(914runnow @ Nov 13 2013, 10:30 AM)
QUOTE(Tonyorlo @ Nov 13 2013, 10:24 AM)
QUOTE(914runnow @ Nov 13 2013, 08:16 AM)
Hi there..still wondering on the main harness??
they can be 'cut out' too..it is about 1/2 hour job
with the body stripped...and still be intacted..
unless you meant the harness is 'hacked up'.....
thanx Rx
Hey, sorry I didn't get back to you. I was looking at it and it's not in terrible shape. I think a few things have been cut off here and there. I won't be able to check it out until Saturday. I will pm you with some pictures and info on it. I don't mind cutting it out
awesome and thanx for the quick reply...
and just to make sure..the car is a 1.8??
Rx
Yeah it is a 1.8.
rmdinmd
Nov 17 2013, 08:07 PM
I am interested in the seat sliders on the drivers side.
Tonyorlo
Nov 17 2013, 09:14 PM
I'm keeping those because I'm swapping the seats into my karmann ghia, sorry.
luka
Nov 21 2013, 09:23 PM
Hi. Is the quarter left hand side door glass (ie, the small trianglar quarter glass and rubber on forward section of door) in good condition ie.without scratchs.
would you sent to australia Melbourne.
email address; domenicluka@hotmail.com
Thanks
Domenic Luka
Tonyorlo
Nov 22 2013, 04:00 PM
Luka, Sorry but it had a chipped corner so I didnt pull it.
luka
Nov 22 2013, 06:47 PM
Thanks for replying. Hope your sale goes well.
Luka
hotlanta914
Dec 12 2013, 07:40 PM
I am interested in the passenger side trailing arm - please let me know if it is still available - thank you,
Brian
poorsche914
Dec 13 2013, 08:49 AM
Interested in the targa bar trim - the piece that goes across the top forward section that the top latches come thru. How much and what condition?
thanks,
steve
Tonyorlo
Dec 13 2013, 02:57 PM
Brian, I still have the trailing arm. Ill shoot you a PM later today with more info on it.
Steve, sorry but that pad was cracked pretty bad.
73cool
Dec 13 2013, 05:40 PM
Do you still have the washer fluid bottle?
Tonyorlo
Dec 13 2013, 07:27 PM
Yeah I still have it. Shipping will be $16 flat rate, shoot me a PM if you want it.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.