Can someone help me locate one for the opposite side? Is there anything special about this part?

Click to view attachment
Click to view attachmentClick to view attachment
Click to view attachmentClick to view attachment
Click to view attachmentClick to view attachment
Click to view attachmentClick to view attachment
Click to view attachmentClick to view attachment
Click to view attachmentClick to view attachment

Yes. They're fairly rare. You'd have to check off the "Bilstein" option on the special order. Put a WTB in the classifieds. Good luck.

just google the part number 9 14 341 091 34

- lots of hits

for example strut AA

and right here on World - struts

all you need is to be willing to spend in the range of $400

Early Bilstein housing part numbered for the 914 . They were the same as the early 911 housings. About an inch longer than the late housings. Inserts are interchangeable. Takes the short gland cap which are NLA but plentiful in the aftermarket sector. The housing body used thinner wall tube than the later ones. Those may have been valved specific for a 914 but later the valving supercedes to the early 911 formula.

Full set for sale in the classifieds....

Thanks to everyone who provided feedback.