Found (or didn't find) some more bits I need. Lemme know what you have.
Side moulding clips- 8
Rear roll bar molding screw/washer mounting thing-2 the screw that mounts it to the fender
Glove box door screw- 1/ the big flat head one the door pivots on
Wiper/washer switch. I just need the rubber part that screws into the switch.
Door hinge screws. I would need all of them- 12, nice ones preferred.
I do Paypal
Thanks in advance

Mike,
I think I have most if not all of those parts. Will start gathering them and send a picture to make sure I know what you need.
Bruce

Bruce, I was hoping you would chime in. Maybe you should just keep a Mike box around your shop

Mike,
I have found most of the parts you need.
So far only found five of the side trim parts.

Please look at the picture and see if these are the parts you need.
Bruce

Looks good, see notes
I also need:
two of the retaining clips for the fresh air cables
10 bolts to mount hood, deck, and engine cover (plated?)
I'll do a pair of your reconditioned targa latches too.
If you have a nice cable casing for the bonnet release I'll be in the market....

It's getting harder and harder to remember what I need....the details are getting smaller

Click to view attachment