Unsure of this brand muffler, pipes are closer to middle than the Ansa 2.0 I have. Pretty sure this is a 1.7l muffler. Its a bit rusty but the only hole I see is a 3mm hole on the can. Maybe someone could use this. Havent cleaned it yet and when I was moving it around i could here some rust flakes inside can from sitting for many years.
length of muffler = 37.5"
tip end to tip end = 17.5"
tips = 2"
I.D tips = 1.85"
flange ends to flange ends = 30.25"
ID of flange pipes are 1.45"

Willing to ship this heavy item for $30.00 in the 48US

Muffler is $100

Actually it looks more like a 2.0 from the position of the flanges that would tuck the muffler under the rear panel. Measure the distance between the flanges the determine which type it is.

https://bowlsby.net/914/Classic/zTN_Exh_MufflerID.jpg